Invalid Partition Table

C

chengat

I have attempted to install Windows XP on an external USB disk drive.

However, the installation did not complete and now, I cannot boot from
my laptop's hard drive!

I get this message about invalid partition table, and something about
the hardware configuration being an issue.

I tried the commands fixmbr, fixboot, to no avail.

Has anyone had this happen to them? Any advice on how I can boot
again on my laptop?

Thanks

Anthony
 
L

Larry(LJL269)

I rebuilt part table using app on Hiran's boot CD. Lost 0 data. If
interested post back & I'll get url & app name. Worked when all else
failed.

Can u get PMagic to access the partition?

HTH-Larry

I have attempted to install Windows XP on an external USB disk drive.

However, the installation did not complete and now, I cannot boot from
my laptop's hard drive!

I get this message about invalid partition table, and something about
the hardware configuration being an issue.

I tried the commands fixmbr, fixboot, to no avail.

Has anyone had this happen to them? Any advice on how I can boot
again on my laptop?

Thanks

Anthony


Any advise given is my attempt to show appreciation for all
the excellent help I've received here but I'm no MVP so it
may only apply NUGS (Normally, Usually, Generally, Sometimes :)
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top