Hi
TV Media is still somewhere on your system, and may not be detected by
SpyBot or your anti-virus. I suggest that you follow the information
below. :
You may have a hijacker, malware, spyware or parasites on your system
causing this problem. Thus, in addition to running your updated anti-virus
program, you should do the following to be sure none of these are present on
your system. Although you may have already run one or more of the programs,
please do so again according to the instructions below. Some variants of
malware can replicate themselves over and over if not removed properly.
Please follow all instructions carefully to be sure your system is
thoroughly cleaned:
Download, install, immediately update the definitions, and then run AdAware
SE
http://www.download.com/3000-2144-10045910.html
Run this in Safe Mode, with Hidden files enabled:
HOW TO Restart in Safe Mode
http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001052409420406
HOW TO Enable Hidden Files
http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2002092715262339
CAUTION!!!!! Before you try to remove spyware using any of the programs
below, download a copy of LSPFIX from any of the following sites:
http://www.cexx.org/lspfix.htm
http://www.spychecker.com/program/winsockxpfix.html
(if your OS is Win2k or XP) The process of removing certain malware may kill
your internet connection. If this should occur, this program, LSPFIX, will
enable you to regain your connection.
Also, get a copy of WinsockFix Utility
http://www.dfwonline.net/files/WinsockFix.zip
or
WinsockXPFix available at:
http://www.spychecker.com/program/winsockxpfix.html
and
WinsockXP Fix- WinXP
http://www.spychecker.com/program/winsockxpfix.html
Also, with instructions, at
http://www.iup.edu/house/resnet/winfix.shtm
also
From LavaSoft- all versions of Windows-
http://digital-solutions.co.uk/lavasoft/whndnfix.zip
also ....
(NOTE: It is reported that in XP SP2, the command netsh winsock reset
will fix this problem without the need for these programs.)
THEN.........
Go to:
http://www.majorgeeks.com/download3155.html
and download HiJackThis to the new folder. Unzip to a folder other than your
Desktop or the Temp folder, doubleclick HiJackThis.exe, and hit "Scan".
When the scan is finished, the "Scan" button will change into a "Save Log"
button. Press that, save the log some place you remember where it is.
Most of what it lists will be harmless or even required, so DO NOT fix
anything yet.
Open the copy of your log in NotePad and make a copy. Then you can go to one
of the following to post your log:
<<PLEASE DO NOT POST YOUR LOG FILE TO THIS NEWSGROUP>>
Spyware and Hijackware Removal Support, here:
http://216.180.233.162/~swicom/forums/
or Net-Integration here:
http://www.net-integration.net/cgi-...86d536d57b5f65b6e40c55365e;act=ST;f=27;t=6949
or Tom Coyote here:
http://forums.tomcoyote.org/index.php?act=idx
You will need to register to open a new thread to post you log. It is free,
and no one will Spam you, it is one of many that provides this service. Once
registered, go to the HiJackThis section on the forum list and click to
open. Then start a new post and post your log. The experts there will
analyze the log and report back the results. Please allow at least a few
hours or a days time for a response, depending on when you post the log
Remember, you must return to the HJT site to get your answer. It is a good
idea to click the "Notify" box so that you will get an electronic
notification by e-mail to let you know when a response has been posted.
But, you must still return to the site of your answer
HJT Tutorial
http://www.bleepingcomputer.com/forums/index.php?showtutorial=42
also.....
Courtesy of Jim Byrd -
Download Sysclean.com, from Trend Micro, here:
http://www.trendmicro.com/download/dcs.asp along with the latest pattern
file, here:
http://www.trendmicro.com/download/pattern.asp
Be sure to read the "How-to" info here:
http://www.trendmicro.com/ftp/products/tsc/readme.txt
You might also want to get Art's updater, SYS-UP.Zip, here for future
updating of these:
http://home.epix.net/~artnpeg/.
(If you download and use the updater from the beginning, it will
automatically handle downloading the other files. Place them in a dedicated
folder after appropriate unzipping, and then run. This scan may take a long
time, as Sysclean is VERY extensive and thorough
and......
NOTE: If you can not download these programs from the Internet, if your PC
has CD read capabilities, go to another computer with CD-ROM burning
capabilities. Create a folder on the hard drive of the other computer called
HOLD, download the programs to that folder, then burn that folder to a CD.
Copy the HOLD folder to your HD and then install the programs from there
and run them. After you have IE access again, update all programs where
possible to get the latest definitions and run them again in Safe Mode to be
sure there are no lingering items on the system.
If these steps do not resolve your problem, please post back to this thread
with the details and any error messages.
Hope this helps
Jan
Smiles are meant to be shared,
that's why they're so contagious.
Please reply to the newsgroup so others may benefit.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm