ICS problem after reset

[Guest]

Sorry if I am repeating previous questions here, but from browsing through
this group I have not found any definite answer.
I have two computers on a home network with a crossover cable. The host
computer is connected to the internet through an ASDL modem and is running XP
Pro SP2. The client is running 2000 Pro SP4.
Following Microsoft's instructions I have successfully set up ICS so that
the client can access the internet, but after resetting (switching off) the
computers the client computer can no longer access the internet. Both
computers can still see each other on the network and TCP/IP settings are as
they were when ICS was set up.
What do I do to keep the internet connection?

Ritchie.

 

[Robert L [MVP - Networking]]

Posting the results of ipconfig /all on both computers.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Sorry if I am repeating previous questions here, but from browsing through
this group I have not found any definite answer.
I have two computers on a home network with a crossover cable. The host
computer is connected to the internet through an ASDL modem and is running XP
Pro SP2. The client is running 2000 Pro SP4.
Following Microsoft's instructions I have successfully set up ICS so that
the client can access the internet, but after resetting (switching off) the
computers the client computer can no longer access the internet. Both
computers can still see each other on the network and TCP/IP settings are as
they were when ICS was set up.
What do I do to keep the internet connection?

Ritchie.

 

[Guest]

Sure, here are the IP details while ICS is working:
Host:
Windows IP Configuration

Host Name . . . . . . . . . . . . : ritchie
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon Gigabit Ethernet 10/
0/1000Base-T Adapter, Copper RJ-45
Physical Address. . . . . . . . . : 00-11-D8-0C-B9-9C
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :

PPP adapter Speedtouch Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 88.106.90.91
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 88.106.90.91
DNS Servers . . . . . . . . . . . : 212.139.132.53
212.139.132.52
Client:
Windows 2000 IP Configuration

Host Name . . . . . . . . . . . . : aislinn
Primary DNS Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139(A) PCI Fast
Ethernet
Adapter
Physical Address. . . . . . . . . : 00-50-BF-80-0F-CE
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1

And after re-starting both computers:
Host:
Windows IP Configuration

Host Name . . . . . . . . . . . . : ritchie
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon Gigabit Ethernet
10/10
0/1000Base-T Adapter, Copper RJ-45
Physical Address. . . . . . . . . : 00-11-D8-0C-B9-9C
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :

PPP adapter Speedtouch Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 88.106.94.230
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 88.106.94.230
DNS Servers . . . . . . . . . . . : 212.139.132.53
212.139.132.52
Client:
Windows 2000 IP Configuration

Host Name . . . . . . . . . . . . : aislinn
Primary DNS Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139(A) PCI Fast
Ethernet
Adapter
Physical Address. . . . . . . . . : 00-50-BF-80-0F-CE
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1

The one obvious difference I'm seeing here is that IP Routing is disabled
after re-starting the host PC. Any idea why that would be?

Thanks for looking at this for me.

Ritchie.