HDD in device info but not recognized in XP Pro

B

Bill

I just installed a Maxtor 80gb hard drive as a slave
drive to a 60gb Western Digital master. Drives are
recognized by bios and are listed in device manager with
no problems. Problem: drive isn't available to XP Pro.
Thanks!
 
C

Crusty \Old B@stard\

Partition and format drive.

--
Regards:

Richard Urban

aka Crusty (-: Old B@stard :)
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

HDD Not Showing Up in XP Pro, But Is Recognized During BOOT. 1
WD HDD not recognized correctly with USB-IDE adaptor 7
Hard drive not recognized 8
XP-Pro doesn't see new drive 4
PROBLEM WITH DETECTION OF 2ND HDIVE AFTER NEW INSTALL 3
Slave Hard Drive Disappears 3
cdrom not detected 7
XP Pro won't boot after disconnecting slave drive 5

Top