G
Guest
I'm running XPe on it's own drive, with all directories configured for C:,
booting a a master. The software resets after getting about 2/3 of the way
through PNP registration. I've restarted the whole process with a new disk,
FAT32, bootprep, with no change in results. The last few entries in the
FBALOG.TXT document are:
4:11:34 AM - [FBAAddDevInstanceId] ACPI\PNP0501\1
4:11:38 AM - [FBAAddDevInstanceId] ACPI\PNP0401\3&61AAA01&0
4:11:41 AM - [FBAAddDevInstanceId]
PCI\VEN_1023&DEV_8500&SUBSYS_85001023&REV_6A\4&37B49237&0&0008
4:11:47 AM - [FBAAddDevInstanceId] PCIIDE\IDECHANNEL\4&1FF4D90&0&0
4:11:51 AM - [FBAAddDevInstanceId] PCIIDE\IDECHANNEL\4&1FF4D90&0&1
4:11:55 AM - [FBAAddDevInstanceId] ISAPNP\READDATAPORT\0
4:11:59 AM - [FBAAddDevInstanceId]
IDE\DISKSAMSUNG_SV1363D_________________________MC100-32\31303237314A4E46333232353532_0_0_0_0_0_0
4:12:02 AM - [FBAAddDevInstanceId]
IDE\DISKWDC_WD205AW-00BEK0______________________11.02C11\4457572D414D3935303139303237_033_0_0_0_0
4:12:09 AM - [FBAAddDevInstanceId] USB\ROOT_HUB\4&22B4ADF3&0
4:12:13 AM - [FBAAddDevInstanceId] USB\ROOT_HUB\4&356E5E98&0
4:12:17 AM - [FBASkipDevice] USB\ROOT_HUB\4&22B4ADF3&0
4:12:17 AM - [FBAAddDevInstanceId]
LPTENUM\MICROSOFTRAWPORT\4&11086FBE&0&LPT1
There are no "error" lines in the fbalog.txt file.
The slx file was downloaded from VIA and intended for the target board: VIA
MiniITX.
Is it resetting on registering the item "RAWPORT" or on the item after that?
If on "RAWPORT" -- what could be the cause?
booting a a master. The software resets after getting about 2/3 of the way
through PNP registration. I've restarted the whole process with a new disk,
FAT32, bootprep, with no change in results. The last few entries in the
FBALOG.TXT document are:
4:11:34 AM - [FBAAddDevInstanceId] ACPI\PNP0501\1
4:11:38 AM - [FBAAddDevInstanceId] ACPI\PNP0401\3&61AAA01&0
4:11:41 AM - [FBAAddDevInstanceId]
PCI\VEN_1023&DEV_8500&SUBSYS_85001023&REV_6A\4&37B49237&0&0008
4:11:47 AM - [FBAAddDevInstanceId] PCIIDE\IDECHANNEL\4&1FF4D90&0&0
4:11:51 AM - [FBAAddDevInstanceId] PCIIDE\IDECHANNEL\4&1FF4D90&0&1
4:11:55 AM - [FBAAddDevInstanceId] ISAPNP\READDATAPORT\0
4:11:59 AM - [FBAAddDevInstanceId]
IDE\DISKSAMSUNG_SV1363D_________________________MC100-32\31303237314A4E46333232353532_0_0_0_0_0_0
4:12:02 AM - [FBAAddDevInstanceId]
IDE\DISKWDC_WD205AW-00BEK0______________________11.02C11\4457572D414D3935303139303237_033_0_0_0_0
4:12:09 AM - [FBAAddDevInstanceId] USB\ROOT_HUB\4&22B4ADF3&0
4:12:13 AM - [FBAAddDevInstanceId] USB\ROOT_HUB\4&356E5E98&0
4:12:17 AM - [FBASkipDevice] USB\ROOT_HUB\4&22B4ADF3&0
4:12:17 AM - [FBAAddDevInstanceId]
LPTENUM\MICROSOFTRAWPORT\4&11086FBE&0&LPT1
There are no "error" lines in the fbalog.txt file.
The slx file was downloaded from VIA and intended for the target board: VIA
MiniITX.
Is it resetting on registering the item "RAWPORT" or on the item after that?
If on "RAWPORT" -- what could be the cause?