External Hard Drive

S

stan

If I used an external hard drive to back up my C:\ drive could I at a later
date when I have a new MB board and Processor installed transfer my C:\
contents from the external drive back to either a new C:\ drive or use the
same old drive that was there before the new MB and Processor were
installed.

Thanks for your time and comments.

Stan
 
B

Bruce Chambers

stan said:
If I used an external hard drive to back up my C:\ drive could I at a later
date when I have a new MB board and Processor installed transfer my C:\
contents from the external drive back to either a new C:\ drive or use the
same old drive that was there before the new MB and Processor were
installed.

Not initially. And the "transfer" would require something more
sophisticated than a simply copy operation; you'd have to use a drive
imaging application of some sort, both the create the backup copy, and
then to restore it.

Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific chipset and therefore not
transferable to a new motherboard - check yours before starting), unless
the new motherboard is virtually identical (same chipset, same IDE
controllers, same BIOS version, etc.) to the one on which the WinXP
installation was originally performed, you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.



--

Bruce Chambers

Help us help you:



You can have peace. Or you can have freedom. Don't ever count on having
both at once. - RAH
 
S

stan

Bruce Chambers,

Thanks for your reply and comments.

Present setup is not OEM. Would like to get faster processor but present MB
is at it's limit.

From comments I am assuming this would also apply to a whole new setup where
moving the existing drive to the new machine.

Thanks again.

Stan
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top