Display

B

BertP

Any idea is appreciated:
WAX Dell Lap Top. Is there any reason that the desktop display does not
fill up the entire screen at a 1024X768 resolution or any other resolution
after the computer boots up?
The display is perfect for a second or 2 and then it reduces and the left
and right portion of the screen is black for about an inch.
If I go to Control Panel/Display/Settings should the 2 boxes be checked?
i.e.. "use this device as the primary monitor and Extend my windows desktop
onto this monitor"?
 
R

Ron Badour

Bert,

My Dell laptop does not have those two settings so I have no experience with
them. Either give them a shot and see what the results are or consider
using your resource CD to reinstall the display adapter driver. You could
also check the Dell web site to see if an updated driver is available. As a
matter of interest, when I use less than the 1024 x 768 setting, I have a
black area on all four sides--not just left and right.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Dell Optiplex graphics driver failure 2
Using wide and regular format monitors 5
Script to check XP Display Setting 1
trouble changing resolution of monitor 1
Monitor Driver 5
Display Settings Don't Remain 1
Using ATI HD4850 X2 display card on WinXP in Theater mode 9
Display set too low:can't see "settings" 6

Top