color calibration hp 1610 problem

[giorgos]

From the moment i bought this f****n printer i have always problems.
I inserted the 348 photo cartridge and ran the "calibrate color"
option.I selected the right patterns and then.....Every print turned to
yellow!!!Nothing to do!I ran 2-3 times the color calibration option but
the problem persists.

Any help before through in trash this F****n printer?

Thanks

 

[Bob Headrick]

From the moment i bought this f****n printer i have always problems.
I inserted the 348 photo cartridge and ran the "calibrate color" option.I
selected the right patterns and then.....Every print turned to
yellow!!!Nothing to do!I ran 2-3 times the color calibration option but the
problem persists.

Did you remove the clear tape from the #348 cartridge? The yellow is from the
color cartridge, light cyan and light magenta are supplied by the #348. It
sounds like your photo cartridge is not working properly.

Regards,
Bob Headrick, not speaking for my employer HP

 

[giorgos]

Did you remove the clear tape from the #348 cartridge? The yellow is
from the color cartridge, light cyan and light magenta are supplied by
the #348. It sounds like your photo cartridge is not working properly.

Regards,
Bob Headrick, not speaking for my employer HP

ok i fixed it Bod!
After the color calibration you need to run a printhead allignment.But
Hp doesn't mention it!