Boot from SATA drive after EIDE added

  • Thread starter William W. Plummer
  • Start date
W

William W. Plummer

My system boots fine when the (new) SATA drive is the only hard disk. If I
add one of my old EIDE drives it tries to boot from it, not my SATA drive.
How can I make it ignore the EIDE drives if present and always boot from the
SATA drive?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

A required device isn't connected or can't be accessed. Error code:0xc0000225 5
cannot access boot device (SATA) 3
NVMe vs SATA SSD Real World Performance 13
Transfer Windows XP from EIDE to SATA. Is it possible? 8
Really slow 2017 iMac 21.5" after fresh install 3
Faulty internal hard drive 10
IDE and SATA drives 13
System does not boot when connecting hard drive to SATA card vs on-boardSATA controller 5

Top