BAD_POOL_CALLER

[Bad Pool Caller Stop Error]

XP will not start up. I am receiving a stop error with the following MSG:
***STOP: 0x000000c2 (0x00000043,0xc4a64000,0x00000000,0x00000000)

What does this mean and how can I get my computer working again?

 

[devil_himself]

XP will not start up. I am receiving a stop error with the following MSG:
***STOP: 0x000000c2 (0x00000043,0xc4a64000,0x00000000,0x00000000)

What does this mean and how can I get my computer working again?

Can You Boot Into Safe Mode .. Do You Have the Xp Disc

 

[Gerry]

Background information on Stop Error message

http://msdn2.microsoft.com/en-us/library/ms796120.aspx

0x000000C2: BAD_POOL_CALLER
(A kernel-mode process or driver incorrectly attempted to perform memory
operations. Typically, a faulty driver or buggy software causes this.
Source: http://aumha.org/a/stop.htm

What hardware and software changes did you make prior to the problem
first arising.

What is the computer make and model.

Please describe your Windows XP system disk.

Disconnect all hardware peripherals except keyboard, mouse and monitor
and see if the computer will boot.

Have you tried to boot into safe mode?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

 

[nass]

XP will not start up. I am receiving a stop error with the following MSG:
***STOP: 0x000000c2 (0x00000043,0xc4a64000,0x00000000,0x00000000)

What does this mean and how can I get my computer working again?

A bad driver or faulty hardware causing your system to crash and turn to a
halt status!.
You need either to start in Safe Mode by tapping the F8 until you get the
boot up options and select "Safe Mode" or "Last Good known config" and grt to
the desktop and troubleshoot from there or by Repair/install the system!.

Stop 0xC2 or BAD_POOL_CALLER
http://www.updatexp.com/stop-messages.html

You may have a bad RAM try to test your RAM by running Memtest by
downloading this tool and unzip it and make a floppy or CD/DVD and run it on
Reboot.
http://www.memtest86.com/
You may need to reposition/reset the RAM sticks in their slots.
After that you could do a repair install, and then test.

How to perform a clean boot in Windows XP
http://support.microsoft.com/?id=310353
A description of the Safe Mode Boot options in Windows XP
http://support.microsoft.com/kb/315222/en-us

If the pagefile that was corrupted. selected no pagefile option under the
perfomance menu in system properties, reboot your system and then recreated
the pagefile again on your system.

If the above doesn't help, back up your data try the info below:
http://www.michaelstevenstech.com/XPrepairinstall.htm

HTH.
nass

 

[nass]

iT'S great Advize! I use it for Everything and I have a silver rating
too!
Bitch!
nass