Asus P4C800-E Deluxe SATA drives

J

JustMe

On this MB there are four SATA drive sockets - two pairs to enable the set
up of a RAID, as I understand it.

If I do not wish to configure a RAID array and I don't set up any RAID in
the BIOS, is it possible to use the second pair of SATA sockets to run two
more storage HDs?

(I've had no problems using all three of the IDE sockets in this fashion -
each with two drives - but haven't tried this with SATA yet).

Thanks.
 
R

RBM

Yes it is, you have to enable the promise controller in bios as non raid or
something like that and install the controllers drivers( you may have to go
into the promise controllers separate bios to do some setup as well
 
J

JustMe

Thanks - that should be fine.

RBM said:
Yes it is, you have to enable the promise controller in bios as non raid or
something like that and install the controllers drivers( you may have to go
into the promise controllers separate bios to do some setup as well
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top