24 hour clock does not work with scan schedule

G

Guest

I am using version 1.0.615 of MS AntiSpyware.

Since I am in Europe I always use a 24 hour clock. Every time I set the scan
to start between 12 and 23 the scan schedule is updated to the corresponding
AM value !!

E.g. I chose to scan every day at 13:00. Result 1:00 AM. 14:00 -> 2 AM etc.

It took me a while to dscover why the system was not scanned for weeks. I
had set it to 13:00 and funnily enough have my computer switched of in the
night time (1 AM). This bug is quite old so hopefully there will be a fix out
soon.

I do not want to do a workaround by switching to 12 hour mode.
 
B

Bill Sanderson

You only need to switch to 12 hour mode long enough to set the schedule.

You can then switch back to 24 hour mode, and the schedule will be
maintained as set.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

scan schedule 5
Scan Scheduler wont allow Afternoon Times 1
scan schedule - setting time 11
24 hour clock and scheduled scan 4
advice on rounding or ceilng a 24 hour time value 3
bug: scan schedule time between 12 and 13 interpreted as between 0 and 1 1
Scan Schedule problem 2
counting cells within certain time frames - 24 hour clock 4

Top