XP Pro vs XP Media Edition

G

Guest

I have bought a new computer with XP Media Edition but would like to just
transfer my old system across without modification. When I do this by
transfering my hard disk it will not boot up. I suspect this is a license
issue. Is this the case, as I just want to continue using my old license?
 
G

Guest

The version of Windows is 'Windows XP Pro' Upgrade with SP2 - the original
OEM version was 'Win XP HOME'

Sammy2Shoes
 
D

Drew Tognola

Sammt2shoes,

Legalities aside, you need to reformat your new computer's hard drive and
then clean install the non-media version of Windows XP. Since you upgraded
to 'Pro' from 'Home' on your old computer, I'm not sure if you need to
install the 'Windows XP Home and then upgrade to 'Pro' again. Also,
hopefully you can save a backup 'image' to return your old computer's
settings to the new computer after reformatting.

Drew
 
B

Bruce Chambers

Sammt2shoes said:
I have bought a new computer with XP Media Edition but would like to just
transfer my old system across without modification. When I do this by
transfering my hard disk it will not boot up.


Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific chipset and therefore *not*
transferable to a new motherboard - check yours before starting), unless
the new motherboard is virtually identical (same chipset, same IDE
controllers, same BIOS version, etc.) to the one on which the WinXP
installation was originally performed, you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.


I suspect this is a license
issue. Is this the case, as I just want to continue using my old license?


There may or may not be a licensing issue, but the reason the old OS
won't boot the new computer is entirely a technical issue.

You may legitimately (technical issues aside) transfer only a retail
WinXP license from one computer to another. If you old computer has an
OEM license, it's not legitimately transferable.


--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. -Benjamin Franklin
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top