X1800gto gpu info?

[DDC]

It's been several day that i've purchase my new video card a sapphire
x1800gto. What i did found yesterday is with the in the program
Everest corporate, the gpu section doesn't report anything as it was
doing with my x800 from msi.

Also, it is known that my VC has a r520 gpu core, but again, in the
same program it say that i got a r520 pro gpu.

So base on that i've goggle that info and find out that this kind of
gpu doesn't have any pipes locked. The problem is that my video card
is r520 only, or suppose to be. One thing that make my think that it
an error is that my gpu and memory clock are 500/495 12pipes as the
pro version is 530/600 16pipes i think.


So i would like to install manually the pro version of the drivers to
see if it will give me some boost without sofmodding anything yet.

I want to try that because once with my x800 i've install omega
drivers and find out that my video card was overcloked at default
setting of an other video card near from what i had.

So finally i'm thinking that MHz and #of pipes are regulated from
drivers that we install... but i'm not sure.


ddc

 

[Sonoflal]

It's been several day that i've purchase my new video card a sapphire
x1800gto. What i did found yesterday is with the in the program
Everest corporate, the gpu section doesn't report anything as it was
doing with my x800 from msi.

Also, it is known that my VC has a r520 gpu core, but again, in the
same program it say that i got a r520 pro gpu.

So base on that i've goggle that info and find out that this kind of
gpu doesn't have any pipes locked. The problem is that my video card
is r520 only, or suppose to be. One thing that make my think that it
an error is that my gpu and memory clock are 500/495 12pipes as the
pro version is 530/600 16pipes i think.


So i would like to install manually the pro version of the drivers to
see if it will give me some boost without sofmodding anything yet.

I want to try that because once with my x800 i've install omega
drivers and find out that my video card was overcloked at default
setting of an other video card near from what i had.

So finally i'm thinking that MHz and #of pipes are regulated from
drivers that we install... but i'm not sure.


ddc

Everest reports an r520 pro gpu for me and i think i have the same gfx card
as you, a HIS X1800GTO IceQ3 ? . i`ve used a modded bios to get the extra
pixel pipes too.

 

[DDC]

Everest reports an r520 pro gpu for me and i think i have the same gfx card
as you, a HIS X1800GTO IceQ3 ? . i`ve used a modded bios to get the extra
pixel pipes too.

Witch brand of bios did you use to flash the card? a power color a
sapphire one or a his? And what program did you you to do that?

 

[Sonoflal]

Witch brand of bios did you use to flash the card? a power color a
sapphire one or a his? And what program did you you to do that?

used a modded GTO bios. keeps the card regognised as a gto but unlocks the 4
extra pixel pipelines. used atiwinflash to flash the bios.
try this :-
http://www.guildwarsguru.com/forum/showpost.php?p=1222326&postcount=1

 

[Sonoflal]

used a modded GTO bios. keeps the card regognised as a gto but unlocks the
4 extra pixel pipelines. used atiwinflash to flash the bios.
try this :-
http://www.guildwarsguru.com/forum/showpost.php?p=1222326&postcount=1

or if you want more info try this:-
http://www.ocforums.com/showthread.php?t=454158&highlight=x1800gto
read the whole thrad. its got lots of info in it.

 

[DDC]

or if you want more info try this:-
http://www.ocforums.com/showthread.php?t=454158&highlight=x1800gto
read the whole thrad. its got lots of info in it.

Hey thank you.
So to make it strait there are not much card that will flash to a xl
from a gto one. His card are actually the one that have more chance to
get the extra pipes.

Also there are some speaking over the numbers of "moset" that are on
some video card and that differ from one and other ex: at the end of
the heat sink there are 6 chip for the HIS and 5 for the sapphire one.
But as i'm looking it write now the xl from sapphire got 5 chip at the
end of the heat sink. So it looks pretty good.

Now i'm with that program.
http://www.radeon2.ru/
rabit 2
it can change every thing in the bios but i can't manage to see the
numbers of pipes in the bios. i just have to assume i guess.

Some day i will attempt the mod i don't have the nerve to mess with
it...
i will wait for more result with sapphire gto to xl success stories...