wireless problem

  • Thread starter Thread starter Dewey
  • Start date Start date
D

Dewey

My Wireless LAN has been acting funny lately. I have a very hard time
connecting to the router (Netgear WGR614, card is WG511, both version 1)
and my LAN tray indicator shows data transmitted to and from in bytes now
instead of packets like it used to. I have not changed anything - except I
updated the wireless card driver via the windows update website. Could that
be the culprit? Everything seems fine even after that until yesterday.
Granted the past few days have been roasting hot here and my office is in
the attic and it was likely over 100 degrees up there. Could my router be
fried? It works perfectly well with my PDA (MA701 card, 802.11b - in
contrast to the WG511 which is 802.11g).

Any ideas?
 
Date: 15 Jun 2005 16:42:57 GMT

My Wireless LAN has been acting funny lately. I have a very hard
time connecting to the router (Netgear WGR614, card is WG511, both
version 1) and my LAN tray indicator shows data transmitted to and
from in bytes now instead of packets like it used to. I have not
changed anything - except I updated the wireless card driver via
the windows update website. Could that be the culprit? Everything
seems fine even after that until yesterday. Granted the past few
days have been roasting hot here and my office is in the attic and
it was likely over 100 degrees up there. Could my router be fried?
It works perfectly well with my PDA (MA701 card, 802.11b - in
contrast to the WG511 which is 802.11g).

Any ideas?


Same problem here for the last 2 days. I have a 2Wire HomePortal 1000HG
and a US Robotics 5410 WiFi PC Card. I don't know what is going on,
sunspots perhaps? Once connected, it is solid as a rock though.


Cheers!


______________________________________________
Bill (using a Toshiba 2595XDVD & Windows 2000)
-- written and edited within Word 2000
 
Date: 15 Jun 2005 16:42:57 GMT

My Wireless LAN has been acting funny lately. I have a very hard
time connecting to the router (Netgear WGR614, card is WG511, both
version 1) and my LAN tray indicator shows data transmitted to and
from in bytes now instead of packets like it used to. I have not
changed anything - except I updated the wireless card driver via
the windows update website. Could that be the culprit? Everything
seems fine even after that until yesterday. Granted the past few
days have been roasting hot here and my office is in the attic and
it was likely over 100 degrees up there. Could my router be fried?
It works perfectly well with my PDA (MA701 card, 802.11b - in
contrast to the WG511 which is 802.11g).

Any ideas?


Same problem here for the last 2 days. I have a 2Wire HomePortal 1000HG
and a US Robotics 5410 WiFi PC Card. I don't know what is going on,
sunspots perhaps? Once connected, it is solid as a rock though.
Well my problem is a little different. I can actually get connected and
surf a while but then I get the inevitable "Server Not Found" as if I've
lost my DNS server. No such problems seen on my work WLAN - but then
again I did install several MS critical updates yesterday - maybe those
are screwy.
 
Date: 15 Jun 2005 18:44:29 GMT

Well my problem is a little different. I can actually get connected
and surf a while but then I get the inevitable "Server Not Found"
as if I've lost my DNS server. No such problems seen on my work
WLAN - but then again I did install several MS critical updates
yesterday - maybe those are screwy.

Oh... yes that is different. I use to get a lot of that while using
dialup vs. broadband. In this case, everything was lost. As packets
would go out, but nothing would come back and find me. Hanging up and
reconnecting would solve it for minutes or hours and then it would
happen again.


Cheers!


______________________________________________
Bill (using a Toshiba 2595XDVD & Windows 2000)
-- written and edited within Word 2000
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top