G
Guest
I know this is the wrong place but ...... please help.......
On my hp casing, the wire colour codes
a/ the black wire and red wire - for Power
b/ the black wire and yellow wire for HD LED
C/ the green wire and the black wire for PLED
(on the hp mobo, it nevermention which is pin1 or pin 2)
and the manual for the new mobo, it says
HD (IDE hard disk active LED) Pin 1: LED anode (+)
Pin 2: LED Cathode (-)
PW (Power switch) Open: Normal
Close: Power ON/OFF
MSG (Message LED/Power/Sleep LED) Pin 1: anode (+)
Pin 2: cathode (-)
My questions are
a) how shall I connect the wires to the new mobo? There are markings on the
mobo but how do I know which wire is anode or cathode?
b) Are the cathode wires always black in colour?
c) on the PW, doesit matter which colour goes to which pin as long asitgoes
to the designated power pins?
Appreciate someone can help me out, many thanks
On my hp casing, the wire colour codes
a/ the black wire and red wire - for Power
b/ the black wire and yellow wire for HD LED
C/ the green wire and the black wire for PLED
(on the hp mobo, it nevermention which is pin1 or pin 2)
and the manual for the new mobo, it says
HD (IDE hard disk active LED) Pin 1: LED anode (+)
Pin 2: LED Cathode (-)
PW (Power switch) Open: Normal
Close: Power ON/OFF
MSG (Message LED/Power/Sleep LED) Pin 1: anode (+)
Pin 2: cathode (-)
My questions are
a) how shall I connect the wires to the new mobo? There are markings on the
mobo but how do I know which wire is anode or cathode?
b) Are the cathode wires always black in colour?
c) on the PW, doesit matter which colour goes to which pin as long asitgoes
to the designated power pins?
Appreciate someone can help me out, many thanks