Windows reboots

L

Loretta

I am putting a new motherboard and processor into an E-Machine. This is the
third replacement on three different emachines.The other two did not give me
this problem.

The hard drive is running Windows XP home with sp2. 256mb memory, 80gb hd,
70gb free. I am installing an Asus K8M-VM main board and sempron 754 socket
processor.

The windows start to boot and then restarts. the error is 0x0000007e (shut
down to protect system.

I may have made it more difficult because I tried to do a repair install
when I couldn't get it to load in safe mode. Now it reboots instead of
finishing the install.

I hope I have given you enough information.
As always my thanks in advance.
Loretta
 
G

Ghostrider

Loretta said:
I am putting a new motherboard and processor into an E-Machine. This is the
third replacement on three different emachines.The other two did not give me
this problem.

The hard drive is running Windows XP home with sp2. 256mb memory, 80gb hd,
70gb free. I am installing an Asus K8M-VM main board and sempron 754 socket
processor.

The windows start to boot and then restarts. the error is 0x0000007e (shut
down to protect system.

I may have made it more difficult because I tried to do a repair install
when I couldn't get it to load in safe mode. Now it reboots instead of
finishing the install.

I hope I have given you enough information.
As always my thanks in advance.
Loretta

An e-Machines computer is has components designed and built for it. And
an ASUS K8M-VM machine has components designed and built for it. These
two machines are so entirely different that the Windows XP that came from
the e-Machines unit is not expected to run when hooked up to the Asus one.
Moreover, since the version of Windows XP supplied for the e-Machines is
bios-locked specifically for it, it would also be doubtful that it can be
installed in the Asus unit. Or the e-Machines Windows XP cdrom is a disc
recovery set.

Time to get a new retail version of Windows XP Home or a Microsoft OEM
version for new computers without an OS.
 
B

Bruce Chambers

Loretta said:
I am putting a new motherboard and processor into an E-Machine. This is the
third replacement on three different emachines.The other two did not give me
this problem.

The hard drive is running Windows XP home with sp2. 256mb memory, 80gb hd,
70gb free. I am installing an Asus K8M-VM main board and sempron 754 socket
processor.

The windows start to boot and then restarts. the error is 0x0000007e (shut
down to protect system.

I may have made it more difficult because I tried to do a repair install
when I couldn't get it to load in safe mode. Now it reboots instead of
finishing the install.

I hope I have given you enough information.
As always my thanks in advance.
Loretta


Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific chipset and therefore are
*not* transferable to a new motherboard - check yours before starting),
unless the new motherboard is virtually identical (same chipset, same
IDE controllers, same BIOS version, etc.) to the one on which the WinXP
installation was originally performed, you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.



--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. ~Benjamin Franklin

Many people would rather die than think; in fact, most do. ~Bertrand Russell

The philosopher has never killed any priests, whereas the priest has
killed a great many philosophers.
~ Denis Diderot
 
B

Bruce Chambers

DL said:
Your e-machines version of winxp is bios locked to origonal hardware. It
wont work


.... unless the replacement motherboard is an identical model obtained
from eMachines, that is. ;-}



--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. ~Benjamin Franklin

Many people would rather die than think; in fact, most do. ~Bertrand Russell

The philosopher has never killed any priests, whereas the priest has
killed a great many philosophers.
~ Denis Diderot
 
L

Loretta

I posted a reply to Anna in the Help and Support section Subject Windows Xp
Reboots.
Loretta
As usual you are all great.
Thanks
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top