Windows 2000 Server Replication Problem

  • Thread starter Thread starter windowsfirst
  • Start date Start date
W

windowsfirst

Hi,

I am having windows server 2000 Replication problem as follows

Hq server and Two branch offices

Both brach offices are not replication to my hq server

In my Brach office servers every 15 min i am getting event id 1311 and 1566

I am able to ping from and to all the servers using FQDN names

I ran dcdiag on my hq server i am getting the following error

[1] FRS can not correctly resolve the DNS name

SOUTHSRV01.test.com from this computer.

[2] FRS is not running on

SOUTHSRV01.test.com.

[3] The topology information in the Active

Directory for this replica has not yet replicated

to all the Domain Controllers.

[1] FRS can not correctly resolve the DNS name

NORTHSVR01.test.com from this computer.

[2] FRS is not running on

NORTHSVR01.test.com.

[3] The topology information in the Active

Directory for this replica has not yet replicated

to all the Domain Controllers.

Servers SOUTHSRV01.test.com,NORTHSVR01.test.com are my brach offices when i
checked all the DNS setting and FQDN seems to be fine

I really need expert help on this and what otherthings i can look for
problem root cause

Thanks for your help
 
Just because you can ping a remote site doesn't mean that you can
communicate with it on other ports. You should run portqry or portqryui and
check to see if the AD ports are open.

Read the following article I have on this and it has steps to follow for
portqryui (Firewall Ports Needed for Replication)
http://www.pbbergs.com/windows/articles.htm


Do you have remote sites defined for your dc's? Are IP addresses defined
for these sites? The KCC is having troubles per the Event log errors you
describe.
Best Practices for Sites and Services
http://technet2.microsoft.com/windo...92b6-431b-8439-91f456e921dd1033.mspx?mfr=true


When someone has troubles and unclear as to why I usually suggest the
following:
Run diagnostics against your Active Directory domain.

If you don't have the support tools installed, install them from your server
install disk.
d:\support\tools\setup.exe

Run dcdiag, netdiag and repadmin in verbose mode.
-> DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log
-> netdiag.exe /v > c:\netdiag.log (On each dc)
-> repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
-> dnslint /ad /s "ip address of your dc"

**Note: Using the /E switch in dcdiag will run diagnostics against ALL dc's
in the forest. If you have significant numbers of DC's this test could
generate significant detail and take a long time. You also want to take
into account slow links to dc's will also add to the testing time.

If you download a gui script I wrote it should be simple to set and run
(DCDiag and NetDiag). It also has the option to run individual tests
without having to learn all the switch options. The details will be output
in notepad text files that pop up automagically.

The script is located on my website at
http://www.pbbergs.com/windows/downloads.htm

Just select both dcdiag and netdiag make sure verbose is set. (Leave the
default settings for dcdiag as set when selected)

When complete search for fail, error and warning messages.

Description and download for dnslint
http://support.microsoft.com/kb/321045

--
Paul Bergson
MVP - Directory Services
MCT, MCSE, MCSA, Security+, BS CSci
2003, 2000 (Early Achiever), NT

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewsGroup
This posting is provided "AS IS" with no warranties, and confers no rights.

windowsfirst said:
Hi,

I am having windows server 2000 Replication problem as follows

Hq server and Two branch offices

Both brach offices are not replication to my hq server

In my Brach office servers every 15 min i am getting event id 1311 and
1566

I am able to ping from and to all the servers using FQDN names

I ran dcdiag on my hq server i am getting the following error

[1] FRS can not correctly resolve the DNS name

SOUTHSRV01.test.com from this computer.

[2] FRS is not running on

SOUTHSRV01.test.com.

[3] The topology information in the Active

Directory for this replica has not yet replicated

to all the Domain Controllers.

[1] FRS can not correctly resolve the DNS name

NORTHSVR01.test.com from this computer.

[2] FRS is not running on

NORTHSVR01.test.com.

[3] The topology information in the Active

Directory for this replica has not yet replicated

to all the Domain Controllers.

Servers SOUTHSRV01.test.com,NORTHSVR01.test.com are my brach offices when
i
checked all the DNS setting and FQDN seems to be fine

I really need expert help on this and what otherthings i can look for
problem root cause

Thanks for your help
Click to expand...
 
Thanks for your reply.I have checked all the tools and this settings was
working fine sometime back and there is no change in our network.I am getting
only the error i ahve menctioned above and event id's 1566 and 1311 every 15
min.All other thing i can do other than replication.

Can some expert point me the right direction to fix this problem

Thanks for your time and help

Paul Bergson said:
Just because you can ping a remote site doesn't mean that you can
communicate with it on other ports. You should run portqry or portqryui and
check to see if the AD ports are open.

Read the following article I have on this and it has steps to follow for
portqryui (Firewall Ports Needed for Replication)
http://www.pbbergs.com/windows/articles.htm


Do you have remote sites defined for your dc's? Are IP addresses defined
for these sites? The KCC is having troubles per the Event log errors you
describe.
Best Practices for Sites and Services
http://technet2.microsoft.com/windo...92b6-431b-8439-91f456e921dd1033.mspx?mfr=true


When someone has troubles and unclear as to why I usually suggest the
following:
Run diagnostics against your Active Directory domain.

If you don't have the support tools installed, install them from your server
install disk.
d:\support\tools\setup.exe

Run dcdiag, netdiag and repadmin in verbose mode.
-> DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log
-> netdiag.exe /v > c:\netdiag.log (On each dc)
-> repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
-> dnslint /ad /s "ip address of your dc"

**Note: Using the /E switch in dcdiag will run diagnostics against ALL dc's
in the forest. If you have significant numbers of DC's this test could
generate significant detail and take a long time. You also want to take
into account slow links to dc's will also add to the testing time.

If you download a gui script I wrote it should be simple to set and run
(DCDiag and NetDiag). It also has the option to run individual tests
without having to learn all the switch options. The details will be output
in notepad text files that pop up automagically.

The script is located on my website at
http://www.pbbergs.com/windows/downloads.htm

Just select both dcdiag and netdiag make sure verbose is set. (Leave the
default settings for dcdiag as set when selected)

When complete search for fail, error and warning messages.

Description and download for dnslint
http://support.microsoft.com/kb/321045

--
Paul Bergson
MVP - Directory Services
MCT, MCSE, MCSA, Security+, BS CSci
2003, 2000 (Early Achiever), NT

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewsGroup
This posting is provided "AS IS" with no warranties, and confers no rights.

windowsfirst said:
Hi,

I am having windows server 2000 Replication problem as follows

Hq server and Two branch offices

Both brach offices are not replication to my hq server

In my Brach office servers every 15 min i am getting event id 1311 and
1566

I am able to ping from and to all the servers using FQDN names

I ran dcdiag on my hq server i am getting the following error

[1] FRS can not correctly resolve the DNS name

SOUTHSRV01.test.com from this computer.

[2] FRS is not running on

SOUTHSRV01.test.com.

[3] The topology information in the Active

Directory for this replica has not yet replicated

to all the Domain Controllers.

[1] FRS can not correctly resolve the DNS name

NORTHSVR01.test.com from this computer.

[2] FRS is not running on

NORTHSVR01.test.com.

[3] The topology information in the Active

Directory for this replica has not yet replicated

to all the Domain Controllers.

Servers SOUTHSRV01.test.com,NORTHSVR01.test.com are my brach offices when
i
checked all the DNS setting and FQDN seems to be fine

I really need expert help on this and what otherthings i can look for
problem root cause

Thanks for your help
Click to expand...
Click to expand...
 
I don't know what your settings are but providing the info I requested can
help solve the issue. I don't know if your sites are defined properly,
maybe they are maybe they aren't but if you are requesting help it would be
best you provide information.

So you have already run below on a dc? If not please do.
repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
start c:\repl.txt

Check out this link
http://www.eventid.net/display.asp?eventid=1311&eventno=524&source=NTDS KCC&phase=1

Set the logging to 1 (Logging levels to 3 or 4 but only for a 20 minute
span)
http://support.microsoft.com/kb/314980

Wade through the Event logs on the dc


--
Paul Bergson
MVP - Directory Services
MCT, MCSE, MCSA, Security+, BS CSci
2003, 2000 (Early Achiever), NT

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewsGroup
This posting is provided "AS IS" with no warranties, and confers no rights.

windowsfirst said:
Thanks for your reply.I have checked all the tools and this settings was
working fine sometime back and there is no change in our network.I am
getting
only the error i ahve menctioned above and event id's 1566 and 1311 every
15
min.All other thing i can do other than replication.

Can some expert point me the right direction to fix this problem

Thanks for your time and help

Paul Bergson said:
Just because you can ping a remote site doesn't mean that you can
communicate with it on other ports. You should run portqry or portqryui
and
check to see if the AD ports are open.

Read the following article I have on this and it has steps to follow for
portqryui (Firewall Ports Needed for Replication)
http://www.pbbergs.com/windows/articles.htm


Do you have remote sites defined for your dc's? Are IP addresses defined
for these sites? The KCC is having troubles per the Event log errors you
describe.
Best Practices for Sites and Services
http://technet2.microsoft.com/windo...92b6-431b-8439-91f456e921dd1033.mspx?mfr=true


When someone has troubles and unclear as to why I usually suggest the
following:
Run diagnostics against your Active Directory domain.

If you don't have the support tools installed, install them from your
server
install disk.
d:\support\tools\setup.exe

Run dcdiag, netdiag and repadmin in verbose mode.
-> DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log
-> netdiag.exe /v > c:\netdiag.log (On each dc)
-> repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
-> dnslint /ad /s "ip address of your dc"

**Note: Using the /E switch in dcdiag will run diagnostics against ALL
dc's
in the forest. If you have significant numbers of DC's this test could
generate significant detail and take a long time. You also want to take
into account slow links to dc's will also add to the testing time.

If you download a gui script I wrote it should be simple to set and run
(DCDiag and NetDiag). It also has the option to run individual tests
without having to learn all the switch options. The details will be
output
in notepad text files that pop up automagically.

The script is located on my website at
http://www.pbbergs.com/windows/downloads.htm

Just select both dcdiag and netdiag make sure verbose is set. (Leave the
default settings for dcdiag as set when selected)

When complete search for fail, error and warning messages.

Description and download for dnslint
http://support.microsoft.com/kb/321045

--
Paul Bergson
MVP - Directory Services
MCT, MCSE, MCSA, Security+, BS CSci
2003, 2000 (Early Achiever), NT

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewsGroup
This posting is provided "AS IS" with no warranties, and confers no
rights.

windowsfirst said:
Hi,

I am having windows server 2000 Replication problem as follows

Hq server and Two branch offices

Both brach offices are not replication to my hq server

In my Brach office servers every 15 min i am getting event id 1311 and
1566

I am able to ping from and to all the servers using FQDN names

I ran dcdiag on my hq server i am getting the following error

[1] FRS can not correctly resolve the DNS name

SOUTHSRV01.test.com from this computer.

[2] FRS is not running on

SOUTHSRV01.test.com.

[3] The topology information in the Active

Directory for this replica has not yet replicated

to all the Domain Controllers.

[1] FRS can not correctly resolve the DNS name

NORTHSVR01.test.com from this computer.

[2] FRS is not running on

NORTHSVR01.test.com.

[3] The topology information in the Active

Directory for this replica has not yet replicated

to all the Domain Controllers.

Servers SOUTHSRV01.test.com,NORTHSVR01.test.com are my brach offices
when
i
checked all the DNS setting and FQDN seems to be fine

I really need expert help on this and what otherthings i can look for
problem root cause

Thanks for your help
Click to expand...
Click to expand...
Click to expand...
 
Back
Top