Win2k server network bridge

G

Guest

How do you bridge 2 NIC cards in a Windows 2000 server?

I know it's simple to do with XP or Server 2003, but I haven't been able to
find anything on how to setup a simple bridge under Server 2000.

I don't need to setup any routing or NAT services, I just need to connect 2
subnets under 192.168.1.x so I can setup some network monitoring and
bandwidth management services.

- Darek
 
S

Sole Viktor

you would need to different subnets (192.168.1.x is one? or are you using a
smal subnet mask?)
your question doesnt realy explain what you are trying to do, if you dont
need nat or routing, you are basicly just setting up to NICs with two
different ip adresses on seperate subnets, no traffic will move between
them.

otherwise you need routing, and to install RRAS
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Is it possible to bridge three NIC on a Windows 2000 Server 12
Make Win2k Server a transparent bridge? 3
Home Networking Question: Bridging/IP Forwarding between 2 LAN segments 11
VPN connects but cannot browse network 10
Three Network Cards 1
ADSL2000 half bridge set up 3
Network bridge problem 9
Network Bridge 1

Top