VPN tunnel end point IP addresses

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello,
Question. When setting up the VPN tunnel between two RRAS servers, which IP address do you use for the tunnel end points, the external NIC or the internal NIC?
Thanks,
Dan
 
Neither. The tunnel endpoint is the IP allocated to the connection. If you
are using router to router VPN between two RRAS servers, the endpoint is
effectively the demand-dial interface.

dsjohn_242 said:
Hello,
Question. When setting up the VPN tunnel between two RRAS servers, which
Click to expand...
IP address do you use for the tunnel end points, the external NIC or the
internal NIC?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Routing and Remote access 1
How to set-up an L2TP Tunnel 4
2003 RRAS config problem 7
How to change the IP address to give to PPTP clients 1
VPN Client Name Resolution 3
Configure Kaspersky Pure to let shared folder to be mapped via VPN 2
External VPN Clients can't authenticate with Windows 2000 VPN Server. 3
LinkSys and W2003S IPsec tunnel 3

Back
Top