VPN dont access local area network

[Guest]

When connecting by a VPN, I only see the VPN Server, not access the others
computers from the network.
The RAS is configured to leave IP by DHCP, example:

IP: 10.0.0.28 (ok from network configuration)
Mask: 255.255.255.255 (Mask from the network = 255.255.255.0)

Sory about the english.
Tanks for helping.

 

[Jason]

The VPN server must be set up for Routing as well as Remote Access; You
must open RRAS snap-in, right-click the server and choose Properties.
Then put a check next to Router and make sure LAN and Demand dial is
selected.

 

[Guest]

On IP properties from the Server are 3 options selected:

Enable IP routing
Allow IP-based remote access and demand-dial connections