VISTA RC1

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello everybody.

I hope anybody here may help me.

I have the following problem:
I want to instll Vista RC1 on a computer equiped with a Asus P5B del/Wifi,
2x Hitchi 80Gb SATAII drives. Everybody works fine until I chose the
destination drive for installation... De Raid0 partition shows up, I select
it and create 1 partition, I click Next and then I get followin message:

Windows could not determin if this Computer contains avalid system Volume !!!

Does anybody may help me? I would be so happy

PS: I connected HD on SATA1 and SATA2 (red, master) ports, activated RAID
mode in Bios for ICH8R Southbridge chip but not for JMicron Raid
 
YUP same here...I think RC stands for "Real Crappy" because this is no
update, its a step backward. The few times I got it to run it runs really
slow....with B2 my score was a 4+ now Vista shows my PC as a 2.x. =(
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

VISTA RC1 on RAID0 system 1
VISTA RC1 installation 3
Vista RC1 installation on ASUS P5B Del/Wifi in Raid0 2
nvidia raid for pre-RC1 3
Can't Install Vista 5536 on Asus P5B Deluxe Wifi Board 3
0x00...7B error with Vista update 1
Intel RAID - array destroyed on RC1, ok on Beta 2 3
Vista RC1 x64 - nvidia4 raid controller driver 2

Back
Top