Vista in boot loop

G

Guest

I recently obtained a copy of Vista and tried to setup using the disc. But
everytime I pressed a key when it prompted "Press any key to boot from CD or
DVD", my PC reboots. And the cycle continues. I can't even get to the setup
page of Vista. What could be the fault? Thanks.

My PC hardwares:

Mobo : MSI K8NGM2-L (GeForce 6100 + nForce 410)
CPU : AMD64 3500+
RAM : 1GB (Corsair)(shared with VGA)
VGA : Integrated GeForce 6 GPU (set at 64MB)
Audio : 8 channel HD audio codec RealTek ALC880.
Harddisk : 200GB Seagate (IDE), 300GB Maxtor (SATA)
DVD Drive : BenQ (DW1620)(Slave), Samsung (SH-S182D)(Master)
 
M

Malke

Officeboy said:
I recently obtained a copy of Vista and tried to setup using the disc. But
everytime I pressed a key when it prompted "Press any key to boot from CD or
DVD", my PC reboots. And the cycle continues. I can't even get to the setup
page of Vista. What could be the fault? Thanks.

My PC hardwares:

Mobo : MSI K8NGM2-L (GeForce 6100 + nForce 410)
CPU : AMD64 3500+
RAM : 1GB (Corsair)(shared with VGA)
VGA : Integrated GeForce 6 GPU (set at 64MB)
Audio : 8 channel HD audio codec RealTek ALC880.
Harddisk : 200GB Seagate (IDE), 300GB Maxtor (SATA)
DVD Drive : BenQ (DW1620)(Slave), Samsung (SH-S182D)(Master)

Can you boot from any other cd or dvd? Try with your XP install disk or,
if you don't have one, Knoppix or a Bart's PE.

If you can't, then you know it's a hardware issue.


Malke
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top