Vista - Dfs share problem

[Guest]

When accessing a share from a Vista client I am getting 0x80070035 'The
network path was not found' error message. When I am accessing the same share
from an XP client there is no errors. Also some of the shared folders can be
accessed with the very same Vista client. The all shares are Dfs share. Also
I can ping the Dfs target where the shared is hosted. I can ping it using
both IP and the NetBios name. The share I have problem with I can add by
using net use \\<ip_address>\>share_name>. When the computer name is used
instead of the IP this doesn't work net use \\<name>\<share_name> Any ideas?
Thanks.

 

[Robert L [MVP - Networking]]

Many possible solutions. This post may help,

Cases: Vista networking2) If browsing in Vista network, receive Network error: error code 0x80070035 - The network path was not found. Solution: 1) Make sure you have shared some ...
http://chicagotech.net/netforums/viewtopic.php?t=356 - Supplemental Result - Similar pages

Vista: Error Code Collections
Error code 0x80070035 - The network path was not found. Resolution: check this link Vista networking - http://www.chicagotech.net/netforums/viewtopic.php?t= ...
http://www.chicagotech.net/netforums/viewtopic.php?p=771&sid=9fac1896af7765e78f331d3bda98bfd2


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
When accessing a share from a Vista client I am getting 0x80070035 'The
network path was not found' error message. When I am accessing the same share
from an XP client there is no errors. Also some of the shared folders can be
accessed with the very same Vista client. The all shares are Dfs share. Also
I can ping the Dfs target where the shared is hosted. I can ping it using
both IP and the NetBios name. The share I have problem with I can add by
using net use \\<ip_address>\>share_name>. When the computer name is used
instead of the IP this doesn't work net use \\<name>\<share_name> Any ideas?
Thanks.

 

[Guest]

Hi Robert,

unfortunatelly still have the same problem I am trying what's going on
by using MS Network Monitor 3 but not luck so far. his is clearly a vista
related problem since I have no problem accessing the shares from my XP
machine. Any suggestions? Thanks.