USB HD Problem

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Have a USB 2.0 HD that I have had operating correctly on a 1.0 connection. Now The system recognises that the device when it is plugged in, but ... No drive letter appears, the properties say the device is working correctly but the drive is 100% used with no free space, which is not the real case. Any ideas on what to do. The data on the drive is not critical.
 
IS the drive still on a USB 1.0 connection or is it now on a 2.0? If the latter I'm encontering a similar problem. The drive isn't recognized when connected to a 2.0 port on my laptop (cardbus adapter), but works fine on another desktop with USB 2.0 on the motherboard. It works fine if I connect it to one of the USB 1.0 ports on the laptop as well.
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

New USB HD recognised but no drive letter 4
Why Transfer from internal HD to USB External Drive? 4
USB 3.0 upgrade 1
Rescuing data from USB external HD 16
External Hard Drive Problem Not like the other problems 3
Lacie 250 GB USB HD asking for drivers in WinXP 3
Device recognition by USB. 2
USB Drive Letter 3

Back
Top