USB Controller Problem . . .

[Guest]

I recently installed Win 2000 over XP Home and have an issue with the usb
controllers. When I start Win2k I get 4 consecutive error messages that the
USB controllers are invalid:

"This device is not configured correctly. (Code 1)"
"To reinstall the drivers for this device, click Reinstall Driver."

I have attempted to reinstall the drivers repeatedly to no avail.

The usb ports worked perfectly under XP. Does anyone have any thoughts or
suggestions? The following info is reported from Sandra:

Operating System(s)
Windows System : Microsoft Windows 2000 Professional Ver 5.00.2195 Service
Pack 4

Processor(s)
Model : AMD Athlon(tm) XP 1800+
Speed : 1.53GHz
Model Number : 1800 (estimated)
Performance Rating : PR2243 (estimated)
L2 On-board Cache : 256kB ECC synchronous write-back

Mainboard and BIOS
Bus(es) : ISA AGP PCI IMB USB FireWire/1394 SMBus/i2c
MP Support : No
System BIOS : Phoenix Technologies, LTD 6.00 PG
Mainboard : VT8367-8233A
System Chipset : Abit Computer Corp VT8366/A Apollo KT266/A,KT333 CPU to PCI
Bridge
Front Side Bus Speed : 2x 133MHz (266MHz data rate)
Installed Memory : 768MB DDR-SDRAM
Memory Bus Speed : 2x 166MHz (332MHz data rate)

Thanks!

Bob Hendry
Southern Maryland

 

[Srikanth N]

In order to resolve this issue, I suggest you to do the following:

1. Start the computer in Windows 2000.
2. Install the Chipset drivers for Windows 2000.
3. Restart the computer and later install the USB drivers.

Additionally, I would also suggest you to install the latest service pack.

Srikanth N
This posting is provided "AS IS" with no warranties, and confers no rights.