Upgrade from 2k - No TCP/IP

T

Tim Gowen

I used a "Windows XP with SP2" CD to upgrade a Windows 2000 computer to
Windows XP. The machine works fine, and IPCONFIG shows an IP address but
the machine cannot be seen using TCP/IP by any other machine on the network.
The Internet Connection Firewall service won't start (it tells me to upgrade
WMI) and SP2 re-install fails ("Access denied" half way through the
installation).

I'm not too worried about the firewall, but I would like TCP/IP in both
directions. Any ideas?


Tim
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

can not adjust TCP/IP settings 6
Lost TCP/IP 9
TCP/IP has reached the security limit imposed 1
can not adjust tcp/ip settings in XP 1
Loosing TCP/IP stack 2
1068 error after reset tcp/ip following a corruption or power outa 5
TCP/IP 1
Firewire no longer recognized - tried to repair, but tells me no TCP/IP installed 3

Top