Thin Client Devices

  • Thread starter Thread starter Paul
  • Start date Start date
P

Paul

I am sorry if this is the wrong type of post, but I have noticed there are a
lot of people who are building their own thin client XPe builds.

I am not sure if there is any interest but if there are people that are
looking for a small fanless SBC, 6"D x 8"W x 2"H, which has 40 pin IDE,
PCMCIA slot, Smart Card Option, PCI Slot, a VIA Eden 533MHz Processor and
includes an internal power supply, 2x PS/2, 2x RS 232, 1x Parallel, 2x USB
1.1, 10/100 NIC, Line In and Out Audio Ports.

We also have this built into an 15" LCD Panel, minus the PCI slot. We have
used CF and DOM to run XPe images and have found this machine to be very
quick.

We will offer this at cost plus small fee for any people coming from the XP
embedded community. We will white boxed with no Athena logo and can assist
in getting your company Logo airbrushed onto the bezel, so as to completely
personalize the unit.

For pictures and specs go to www.athenausa.com/products.htm and look at the
ATH-3350 and the ATH-3350F.

If this is an inappropriate post, leave it alone and it will die a quick
death :-).

Sincerely and Happy Holidays

Paul Tyler
Athena USA
952-876-0428
 
Hi Paul

I am very interested, could you please send me a private
e-mail in frank*at*thyamad*dot*com with prices for one
sample and one hundred at month.

Frank Alcantara
-----Original Message-----
I am sorry if this is the wrong type of post, but I have noticed there are a
lot of people who are building their own thin client XPe builds.

I am not sure if there is any interest but if there are people that are
looking for a small fanless SBC, 6"D x 8"W x 2"H, which has 40 pin IDE,
PCMCIA slot, Smart Card Option, PCI Slot, a VIA Eden 533MHz Processor and
includes an internal power supply, 2x PS/2, 2x RS 232, 1x Parallel, 2x USB
1.1, 10/100 NIC, Line In and Out Audio Ports.

We also have this built into an 15" LCD Panel, minus the PCI slot. We have
used CF and DOM to run XPe images and have found this machine to be very
quick.

We will offer this at cost plus small fee for any people coming from the XP
embedded community. We will white boxed with no Athena logo and can assist
in getting your company Logo airbrushed onto the bezel, so as to completely
personalize the unit.

For pictures and specs go to
Click to expand...
www.athenausa.com/products.htm and look at the
 
Back
Top