SysprepMassStorage Problem on Compaq servers

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have a base Win2K image captured with a ML570 Smart 3200 controller and I
need to deploy to servers with (DL580) 4200 and (DL380) 5300 controllers. I
have scoured the web and have seen similar situations, but no resolution with
compaq RAID controllers.

I have tried multiple combinations in my Sysprep.inf but the server always
blue screens with the STOP 0x07B, Inaccessible_boot_device. It's as if it
doesn't see the *.inf files in the device path. I have also tried
preinstalling the drivers with no luck. Any leads to resolving this would be
appreciated!

See sysprep.inf below...

[Unattended]
OemSkipEula = Yes
OemPreInstall = Yes
TargetPath = \WINNT
InstallFilesPath = "C:\sysprep\i386"
OemPnPDriversPath =
drivers\hpcpq\cpq32fs2;drivers\hpcpq\cpqarry;drivers\hpcpq\cpqarry2;drivers\hpcpq\cpqcissm

[SysprepMassStorage]
;COMPAQ 2/P, 2DH, 2SL, 221, 3200 CONTROLLERS
PCI\VEN_0E11&DEV_AE10&SUBSYS_40300E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf",\,"Smart Array 2x and 3x Driver
Diskette", "\cpqarry.sys"
;COMPAQ SMART ARRAY-2 CONTROLLERS
PCI\VEN_1000&DEV_0010&SUBSYS_40400E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray2.inf",\,"Compaq Smart Array Controllers
Driver for Windows 2000", "\cpqarry2.sys"
;COMPAQ SMART ARRAY 5x AND 6x CONTROLLERS
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf",\,"Smart Array 5x and 6x Driver
Diskette", "\cpqcissm.sys"
 
Running sysprep v1.1 with W2K SP4

John John said:
What version of sysprep are you using?

John
I have a base Win2K image captured with a ML570 Smart 3200 controller and I
need to deploy to servers with (DL580) 4200 and (DL380) 5300 controllers. I
have scoured the web and have seen similar situations, but no resolution with
compaq RAID controllers.

I have tried multiple combinations in my Sysprep.inf but the server always
blue screens with the STOP 0x07B, Inaccessible_boot_device. It's as if it
doesn't see the *.inf files in the device path. I have also tried
preinstalling the drivers with no luck. Any leads to resolving this would be
appreciated!

See sysprep.inf below...

[Unattended]
OemSkipEula = Yes
OemPreInstall = Yes
TargetPath = \WINNT
InstallFilesPath = "C:\sysprep\i386"
OemPnPDriversPath =
drivers\hpcpq\cpq32fs2;drivers\hpcpq\cpqarry;drivers\hpcpq\cpqarry2;drivers\hpcpq\cpqcissm

[SysprepMassStorage]
;COMPAQ 2/P, 2DH, 2SL, 221, 3200 CONTROLLERS
PCI\VEN_0E11&DEV_AE10&SUBSYS_40300E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf",\,"Smart Array 2x and 3x Driver
Diskette", "\cpqarry.sys"
;COMPAQ SMART ARRAY-2 CONTROLLERS
PCI\VEN_1000&DEV_0010&SUBSYS_40400E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray2.inf",\,"Compaq Smart Array Controllers
Driver for Windows 2000", "\cpqarry2.sys"
;COMPAQ SMART ARRAY 5x AND 6x CONTROLLERS
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf",\,"Smart Array 5x and 6x Driver
Diskette", "\cpqcissm.sys"
Click to expand...
Click to expand...
 
Hmmmm... you might see something that applies here:

http://h18000.www1.hp.com/pcn/images/ICH2 to MCH_final.pdf#search='compaq SysprepMassStorage'


Running sysprep v1.1 with W2K SP4

:

What version of sysprep are you using?

John
I have a base Win2K image captured with a ML570 Smart 3200 controller and I
need to deploy to servers with (DL580) 4200 and (DL380) 5300 controllers. I
have scoured the web and have seen similar situations, but no resolution with
compaq RAID controllers.

I have tried multiple combinations in my Sysprep.inf but the server always
blue screens with the STOP 0x07B, Inaccessible_boot_device. It's as if it
doesn't see the *.inf files in the device path. I have also tried
preinstalling the drivers with no luck. Any leads to resolving this would be
appreciated!

See sysprep.inf below...

[Unattended]
OemSkipEula = Yes
OemPreInstall = Yes
TargetPath = \WINNT
InstallFilesPath = "C:\sysprep\i386"
OemPnPDriversPath =
drivers\hpcpq\cpq32fs2;drivers\hpcpq\cpqarry;drivers\hpcpq\cpqarry2;drivers\hpcpq\cpqcissm

[SysprepMassStorage]
;COMPAQ 2/P, 2DH, 2SL, 221, 3200 CONTROLLERS
PCI\VEN_0E11&DEV_AE10&SUBSYS_40300E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf",\,"Smart Array 2x and 3x Driver
Diskette", "\cpqarry.sys"
;COMPAQ SMART ARRAY-2 CONTROLLERS
PCI\VEN_1000&DEV_0010&SUBSYS_40400E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray2.inf",\,"Compaq Smart Array Controllers
Driver for Windows 2000", "\cpqarry2.sys"
;COMPAQ SMART ARRAY 5x AND 6x CONTROLLERS
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf",\,"Smart Array 5x and 6x Driver
Diskette", "\cpqcissm.sys"
Click to expand...
Click to expand...
Click to expand...
 
Finally figured it out! Phew!

Ok, I mainly had to alter the entries in the SysprepMassStorage. Originally
I had the following syntax:
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf",\,"Smart Array 5x and 6x Driver
Diskette", "\cpqcissm.sys", which was the same syntax in the txtsetup.oem
file. And after seeing this format all over the web I just knew I had the
correct format.

The link from John John wasn't exactly the fix; although, it did lead me in
the right direction. To fix the problem I basically removed the [\,"Smart
Array 5x and 6x Driver Diskette", "\cpqcissm.sys"] from the device line. So,
the format PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf" worked! Way too simple right!!!

Originally once I executed Sysprep, it immediately restarted the server. I
knew it worked because after the change because the box did not immediately
bounce AND I received an error (for misspelling something). I was on my way
at least! Corrected the error, uploaded and brought down the image on 5
different servers and it worked. The server models were Dell PowerEdge 2650,
CPQ DL580, CPQ DL380, CPQ ML570 and will be testing an IBM 346 tomorrow
(yeah, were a mixed bag of tricks here).

Thanks for your help John John. Now I can continue my Disaster Recovery
testing!

Here goes a copy of the sysprep.inf (watch for wrapping):

--- Begin sysprep.inf ---
[Unattended]
OemSkipEula = Yes
TargetPath = \WINNT
InstallFilesPath = "C:\sysprep\i386"

;This key is valid only when performing a SYSPREP-based installation.
;This key should be specified only when installing an image created
;from a uniprocessor master system to a multiprocessor target system.
;This key notifies Setup to use the Multiprocessor (MP) HAL rather than
;the Uniprocessor (UP) HAL present when the system was imaged.
;You should not reapply this image to a Uniprocessor machine,
;or there will be a noticeable hit to performance
;Enable next line ONLY if building master on UP to apply to MP.
;UpdateHAL = "ACPIAPIC_MP,%windir%\inf\hal.inf"

;This key is valid only when performing a SYSPREP-based installation.
;This key should be specified only when installing an image created from
;a multiprocessor master system using the ACPI APIC HAL to an APIC-compatible
;uniprocessor or multiprocessor target system. This key notifies Setup to
;redetect the proper kernel based on the number of processors.
;Enable next line if building master image on MP machine to apply the image
;to either MP or UP machines.
UpdateUPHAL = "ACPIAPIC_UP,%SystemDrive%\Sysprep\i386\Uniproc\Mp2up.inf"

[GuiUnattended]
Timezone=020
OemSkipRegional = 1
OemSkipWelcome = 1
Adminpassword=*

[UserData]
Fullname="xxxxxxxxxx"
Orgname="xxxxxxxxxxx"
Computername="xxxxxxxxxx"
Productid="xxxxxxxxxxxxxxxxxxxxx"

[LicenseFilePrintData]
AutoMode = "PerSeat"

[Networking]

[Identification]
Joinworkgroup=Workgroup

;The following key is only supported by Sysprep v1.1.
;This section allows a SYSPREP image to install on a machine
;with any of the drive controller types matching the
;plug and play IDs of the lines below.
;
;Format of this section is:
; <PlugAndPlayID> = "<path to device inf>" or
; <PlugAndPlayID> = "<path to device inf>", "<disk directory>", "<disk
description>", "<disk tag>"
;
;Any lines ending in MSHDC.INF are for IDE drive support.
;Any lines ending in SCSI.INF are for SCSI drive support.

[SysprepMassStorage]
; *******************************
; HP/Compaq SCSI and RAID Drivers
; *******************************

;COMPAQ 32-BIT Fast/Wide/Ultra/Ultra2/64 Bit Ultra2/SCSI3/Int. Wide Ultra2
Device Driver
PCI\VEN_1000&DEV_0003 = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_000f = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_000b = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_000c = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_0001 = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_000a = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_0012 = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
NCRC710_SCSI = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
CPQFWS2E_SCSI = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
;COMPAQ 2/P, 2DH, 2SL, 221, 3200 CONTROLLERS
PCI\VEN_0E11&DEV_AE10&SUBSYS_40300E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf"
PCI\VEN_0E11&DEV_AE10&SUBSYS_40310E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf"
PCI\VEN_0E11&DEV_AE10&SUBSYS_40320E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf"
PCI\VEN_0E11&DEV_AE10&SUBSYS_40330E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf"
PCI\VEN_0E11&DEV_AE10&SUBSYS_40340E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf"
CPQARRAY_SCSI = "C:\drivers\hpcpq\cpqarray\cpqarray.inf"
DETECTED\cpqarray = "C:\drivers\hpcpq\cpqarray\cpqarray.inf"
;COMPAQ SMART ARRAY-2 CONTROLLERS
PCI\VEN_1000&DEV_0010&SUBSYS_40400E11 =
"C:\drivers\hpcpq\cpqarry2\cpqarry2.inf"
PCI\VEN_1000&DEV_0010&SUBSYS_40480E11 =
"C:\drivers\hpcpq\cpqarry2\cpqarry2.inf"
PCI\VEN_1011&DEV_0046&SUBSYS_40500E11 =
"C:\drivers\hpcpq\cpqarry2\cpqarry2.inf"
PCI\VEN_1011&DEV_0046&SUBSYS_40510E11 =
"C:\drivers\hpcpq\cpqarry2\cpqarry2.inf"
PCI\VEN_1011&DEV_0046&SUBSYS_40580E11 =
"C:\drivers\hpcpq\cpqarry2\cpqarry2.inf"
;COMPAQ SMART ARRAY 5X AND 6X CONTROLLERS
SCSI\OtherCOMPAQ__SCSI_COMMUNICATECISS =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf"
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf"
;ADAPTEC ULTRA160 SCSI CONTROLLERS
PCI\VEN_9005&DEV_00C0 = "C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_00C0&SUBSYS_F6209005 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_00C0&SUBSYS_F6200E11 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_0080 = "C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_0080&SUBSYS_E2A09005 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_0080&SUBSYS_E2A00E11 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_0080&SUBSYS_62A09005 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_0080&SUBSYS_E2209005 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_008F = "C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_00CF = "C:\drivers\hpcpq\adpu160m\adpu160m.inf"

; ******************************
; IBM RAID AND SCSI CONTROLLERS
; ******************************

;IBM x-Series 360 AIC7892
PCI\VEN_9005&DEV_008F = %WINDIR%\INF\SCSI.INF

;Adaptec HostRAID U320 Driver
PCI\VEN_9005&DEV_00c4 = "C:\drivers\ibm\u320\oemsetup.inf"
PCI\VEN_9005&DEV_8011 = "C:\drivers\ibm\u320\oemsetup.inf"

;IBM ServeRAID 4M/4L/4Mx/4Lx/5i/6M/6i/7k Device Driver
PCI\VEN_1014&DEV_01BD&SUBSYS_01BE1014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_01BD&SUBSYS_01BF1014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_01BD&SUBSYS_02081014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_01BD&SUBSYS_020E1014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_01BD&SUBSYS_02591014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_9005&DEV_0250&SUBSYS_02791014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_9005&DEV_0250&SUBSYS_028C1014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_9005&DEV_0250&SUBSYS_028E1014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"

;IBM II/3H/3L/4H/PC/Integrated Device Driver
PCI\VEN_1014&DEV_002E&SUBSYS_022E1014&REV_10 =
"C:\drivers\ibm\ppcdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_002E&SUBSYS_002E1014&REV_0D =
"C:\drivers\ibm\ppcdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_002E&SUBSYS_00000000&REV_04 =
"C:\drivers\ibm\ppcdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_002E&SUBSYS_00000000&REV_03 =
"C:\drivers\ibm\ppcdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_002E&SUBSYS_00000000&REV_02 =
"C:\drivers\ibm\ppcdrvr\oemsetup.inf"

; ******************************
; DELL RAID AND SCSI CONTROLLERS
; ******************************

;DELL PowerEdge 1400 AIC7899
PCI\VEN_9005&DEV_00CF = %WINDIR%\INF\SCSI.INF

; AdvancedRAID devices
PCI\VEN_1011&DEV_0046&SUBSYS_13649005 = "C:\drivers\dell\perc2\Perc2.inf"

; RAIDpoint devices
PCI\VEN_1028&DEV_0001&SUBSYS_00011028 = "C:\drivers\dell\perc2\Perc2.inf"

; RAIDpoint devices using Gatling technology
PCI\VEN_1028&DEV_0002&SUBSYS_00021028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_0003&SUBSYS_00031028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_0002&SUBSYS_00D11028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_0002&SUBSYS_00D91028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_000A&SUBSYS_01061028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_000A&SUBSYS_011B1028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_000A&SUBSYS_01211028 = "C:\drivers\dell\perc2\Perc2.inf"

--- End Sysprep.inf ---
 
You're welcome. I sort of had my doubts that the article would be a fix
because of IDE vs Mass Storage, however being that the new chips cause
problems with storage controllers I figured it could be a chance that it
would also cause problems with Mass Storage devices. I'm glad to see
that the syntax in the article led you to the right fix. Very nice of
you to post your working .inf files here, I'm sure they will be very
helpful to others with this problem.

Regards;

John
Finally figured it out! Phew!

Ok, I mainly had to alter the entries in the SysprepMassStorage. Originally
I had the following syntax:
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf",\,"Smart Array 5x and 6x Driver
Diskette", "\cpqcissm.sys", which was the same syntax in the txtsetup.oem
file. And after seeing this format all over the web I just knew I had the
correct format.

The link from John John wasn't exactly the fix; although, it did lead me in
the right direction. To fix the problem I basically removed the [\,"Smart
Array 5x and 6x Driver Diskette", "\cpqcissm.sys"] from the device line. So,
the format PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf" worked! Way too simple right!!!

Originally once I executed Sysprep, it immediately restarted the server. I
knew it worked because after the change because the box did not immediately
bounce AND I received an error (for misspelling something). I was on my way
at least! Corrected the error, uploaded and brought down the image on 5
different servers and it worked. The server models were Dell PowerEdge 2650,
CPQ DL580, CPQ DL380, CPQ ML570 and will be testing an IBM 346 tomorrow
(yeah, were a mixed bag of tricks here).

Thanks for your help John John. Now I can continue my Disaster Recovery
testing!

Here goes a copy of the sysprep.inf (watch for wrapping):

--- Begin sysprep.inf ---
[Unattended]
OemSkipEula = Yes
TargetPath = \WINNT
InstallFilesPath = "C:\sysprep\i386"

;This key is valid only when performing a SYSPREP-based installation.
;This key should be specified only when installing an image created
;from a uniprocessor master system to a multiprocessor target system.
;This key notifies Setup to use the Multiprocessor (MP) HAL rather than
;the Uniprocessor (UP) HAL present when the system was imaged.
;You should not reapply this image to a Uniprocessor machine,
;or there will be a noticeable hit to performance
;Enable next line ONLY if building master on UP to apply to MP.
;UpdateHAL = "ACPIAPIC_MP,%windir%\inf\hal.inf"

;This key is valid only when performing a SYSPREP-based installation.
;This key should be specified only when installing an image created from
;a multiprocessor master system using the ACPI APIC HAL to an APIC-compatible
;uniprocessor or multiprocessor target system. This key notifies Setup to
;redetect the proper kernel based on the number of processors.
;Enable next line if building master image on MP machine to apply the image
;to either MP or UP machines.
UpdateUPHAL = "ACPIAPIC_UP,%SystemDrive%\Sysprep\i386\Uniproc\Mp2up.inf"

[GuiUnattended]
Timezone=020
OemSkipRegional = 1
OemSkipWelcome = 1
Adminpassword=*

[UserData]
Fullname="xxxxxxxxxx"
Orgname="xxxxxxxxxxx"
Computername="xxxxxxxxxx"
Productid="xxxxxxxxxxxxxxxxxxxxx"

[LicenseFilePrintData]
AutoMode = "PerSeat"

[Networking]

[Identification]
Joinworkgroup=Workgroup

;The following key is only supported by Sysprep v1.1.
;This section allows a SYSPREP image to install on a machine
;with any of the drive controller types matching the
;plug and play IDs of the lines below.
;
;Format of this section is:
; <PlugAndPlayID> = "<path to device inf>" or
; <PlugAndPlayID> = "<path to device inf>", "<disk directory>", "<disk
description>", "<disk tag>"
;
;Any lines ending in MSHDC.INF are for IDE drive support.
;Any lines ending in SCSI.INF are for SCSI drive support.

[SysprepMassStorage]
; *******************************
; HP/Compaq SCSI and RAID Drivers
; *******************************

;COMPAQ 32-BIT Fast/Wide/Ultra/Ultra2/64 Bit Ultra2/SCSI3/Int. Wide Ultra2
Device Driver
PCI\VEN_1000&DEV_0003 = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_000f = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_000b = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_000c = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_0001 = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_000a = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
PCI\VEN_1000&DEV_0012 = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
NCRC710_SCSI = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
CPQFWS2E_SCSI = "C:\drivers\hpcpq\cpq32fs2\cpq32fs2.inf"
;COMPAQ 2/P, 2DH, 2SL, 221, 3200 CONTROLLERS
PCI\VEN_0E11&DEV_AE10&SUBSYS_40300E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf"
PCI\VEN_0E11&DEV_AE10&SUBSYS_40310E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf"
PCI\VEN_0E11&DEV_AE10&SUBSYS_40320E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf"
PCI\VEN_0E11&DEV_AE10&SUBSYS_40330E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf"
PCI\VEN_0E11&DEV_AE10&SUBSYS_40340E11 =
"C:\drivers\hpcpq\cpqarray\cpqarray.inf"
CPQARRAY_SCSI = "C:\drivers\hpcpq\cpqarray\cpqarray.inf"
DETECTED\cpqarray = "C:\drivers\hpcpq\cpqarray\cpqarray.inf"
;COMPAQ SMART ARRAY-2 CONTROLLERS
PCI\VEN_1000&DEV_0010&SUBSYS_40400E11 =
"C:\drivers\hpcpq\cpqarry2\cpqarry2.inf"
PCI\VEN_1000&DEV_0010&SUBSYS_40480E11 =
"C:\drivers\hpcpq\cpqarry2\cpqarry2.inf"
PCI\VEN_1011&DEV_0046&SUBSYS_40500E11 =
"C:\drivers\hpcpq\cpqarry2\cpqarry2.inf"
PCI\VEN_1011&DEV_0046&SUBSYS_40510E11 =
"C:\drivers\hpcpq\cpqarry2\cpqarry2.inf"
PCI\VEN_1011&DEV_0046&SUBSYS_40580E11 =
"C:\drivers\hpcpq\cpqarry2\cpqarry2.inf"
;COMPAQ SMART ARRAY 5X AND 6X CONTROLLERS
SCSI\OtherCOMPAQ__SCSI_COMMUNICATECISS =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf"
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11 =
"C:\drivers\hpcpq\cpqcissm\cpqcissm.inf"
;ADAPTEC ULTRA160 SCSI CONTROLLERS
PCI\VEN_9005&DEV_00C0 = "C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_00C0&SUBSYS_F6209005 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_00C0&SUBSYS_F6200E11 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_0080 = "C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_0080&SUBSYS_E2A09005 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_0080&SUBSYS_E2A00E11 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_0080&SUBSYS_62A09005 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_0080&SUBSYS_E2209005 =
"C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_008F = "C:\drivers\hpcpq\adpu160m\adpu160m.inf"
PCI\VEN_9005&DEV_00CF = "C:\drivers\hpcpq\adpu160m\adpu160m.inf"

; ******************************
; IBM RAID AND SCSI CONTROLLERS
; ******************************

;IBM x-Series 360 AIC7892
PCI\VEN_9005&DEV_008F = %WINDIR%\INF\SCSI.INF

;Adaptec HostRAID U320 Driver
PCI\VEN_9005&DEV_00c4 = "C:\drivers\ibm\u320\oemsetup.inf"
PCI\VEN_9005&DEV_8011 = "C:\drivers\ibm\u320\oemsetup.inf"

;IBM ServeRAID 4M/4L/4Mx/4Lx/5i/6M/6i/7k Device Driver
PCI\VEN_1014&DEV_01BD&SUBSYS_01BE1014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_01BD&SUBSYS_01BF1014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_01BD&SUBSYS_02081014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_01BD&SUBSYS_020E1014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_01BD&SUBSYS_02591014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_9005&DEV_0250&SUBSYS_02791014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_9005&DEV_0250&SUBSYS_028C1014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"
PCI\VEN_9005&DEV_0250&SUBSYS_028E1014 = "C:\drivers\ibm\ivdrvr\oemsetup.inf"

;IBM II/3H/3L/4H/PC/Integrated Device Driver
PCI\VEN_1014&DEV_002E&SUBSYS_022E1014&REV_10 =
"C:\drivers\ibm\ppcdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_002E&SUBSYS_002E1014&REV_0D =
"C:\drivers\ibm\ppcdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_002E&SUBSYS_00000000&REV_04 =
"C:\drivers\ibm\ppcdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_002E&SUBSYS_00000000&REV_03 =
"C:\drivers\ibm\ppcdrvr\oemsetup.inf"
PCI\VEN_1014&DEV_002E&SUBSYS_00000000&REV_02 =
"C:\drivers\ibm\ppcdrvr\oemsetup.inf"

; ******************************
; DELL RAID AND SCSI CONTROLLERS
; ******************************

;DELL PowerEdge 1400 AIC7899
PCI\VEN_9005&DEV_00CF = %WINDIR%\INF\SCSI.INF

; AdvancedRAID devices
PCI\VEN_1011&DEV_0046&SUBSYS_13649005 = "C:\drivers\dell\perc2\Perc2.inf"

; RAIDpoint devices
PCI\VEN_1028&DEV_0001&SUBSYS_00011028 = "C:\drivers\dell\perc2\Perc2.inf"

; RAIDpoint devices using Gatling technology
PCI\VEN_1028&DEV_0002&SUBSYS_00021028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_0003&SUBSYS_00031028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_0002&SUBSYS_00D11028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_0002&SUBSYS_00D91028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_000A&SUBSYS_01061028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_000A&SUBSYS_011B1028 = "C:\drivers\dell\perc2\Perc2.inf"
PCI\VEN_1028&DEV_000A&SUBSYS_01211028 = "C:\drivers\dell\perc2\Perc2.inf"

--- End Sysprep.inf ---

:

I too am getting the Inaccessable Boot Device error message. I looked
at the website below and incorporated the changes but I am still
getting the error. Any other ideas that could possibly help me out?




http://h18000.www1.hp.com/pcn/images/ICH2 to MCH_final.pdf#search='compaq SysprepMassStorage'
Click to expand...
Click to expand...
 
Joe, I read your findings but I am still unable to get my sysprep to
work properly. I am getting the same Inaccessable boot device error
message. I am trying to switch from a CPQ ML370 with a 5300 SCSI
adapter to a CPQ DL360 with a 5i SCSI adapter. Could you, or someone,
please take a look at my sysprep.inf file to see where my issue is?

[Unattended]
OemSkipEula = Yes
TargetPath = \WINNT
InstallFilesPath="c:\sysprep\i386"

[GuiUnattended]
OEMSkipRegional = 1
OemSkipWelcome = 1
Adminpassword=*

[UserData]
FullName = ***
OrgName = ***
ComputerName = ***
ProductID = ***

[LicenseFilePrintData]
AutoMode = PerSeat

[Identification]
JoinWorkgroup=workgroup

[Networking]
InstallDefaultComponents = Yes

[SysprepMassStorage]

SCSI\OtherCOMPAQ__SCSI_COMMUNICATECISS = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11 = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11 = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11 = "C:\scsi\drivers\cpqcissm.inf
 
Joe,

The is similar to your issue. The directory naming is a little

different, but

may be worth a try. This was on a Windows 2003 server not 2000

Issue: Windows server 2003 Image from HP DL580. to HP

DL380 and Raid Controller Customer is using is 5304 4 channel raid

controller..

and Once Customer boots up with the Imgae he is getting in Reboot Loop

.... which is

most likely an Stop 0x0000007B

Create a new sysprep.inf file or edit the existing

Modify the sysprep.inf as the following according to the vendor provided

inf file.
 
Hi Chad,

Thanks to Joe (2 thumbs up man) I was finally able to install the new
DL380-G4 using ADS.
I had some issues getting it to work, even with all the findings mentioned
below.
Not sure if more people are struggling, I'm going to write down the steps I
took.
Forgive me if these are all very logical to you, but I was struggling with
the fact that I had to re-run the whole sysprep process.

I restored my Master Image (non-sysprepped) and ran the sysprep.exe -bmsd.
This popultaes the sysprep.ini file with all MassStorageDevices currently
known (and recognised) to the machine. This also includes controllers that
you don't have installed, but Win2k3 is capable of recognising.

Then I edited the sysprep.ini file, and inserted all info from the new 6i
Controller. As you already mentioned, make sure the format is correct !!!
I also commented out the:
;[Sysprep]
;BuildMassStorageSection = Yes
since that was already done by running sysprep.exe -bmsd.

One last reboot, and then I prepare the image with:
sysprep.exe -quiet -pnp -reboot -reseal

Then I have it boot to DA and grab the image.

I hope this helps for the people that (like me) didn't realize they have to
redo the sysprep.

If anyone has a trick to bypass the whole re-storing and re-sysprepping of
the image, please feel free to respond to the thread.

Thanks,

Ruud
 
Hi Ruud,

could you show me a copy of your sysprep.inf file so that I can compare
it against mine to make sure my syntext is correct? I'd really
appreciate it.

thanks,

chad
Hi Chad,

Thanks to Joe (2 thumbs up man) I was finally able to install the new
Click to expand...
DL380-G4 using ADS.
I had some issues getting it to work, even with all the findings mentioned
below.
Not sure if more people are struggling, I'm going to write down the steps I
took.
Forgive me if these are all very logical to you, but I was struggling with
the fact that I had to re-run the whole sysprep process.

I restored my Master Image (non-sysprepped) and ran the sysprep.exe -bmsd.
This popultaes the sysprep.ini file with all MassStorageDevices currently
known (and recognised) to the machine. This also includes controllers that
you don't have installed, but Win2k3 is capable of recognising.

Then I edited the sysprep.ini file, and inserted all info from the new 6i
Controller. As you already mentioned, make sure the format is correct !!!
I also commented out the:
;[Sysprep]
;BuildMassStorageSection = Yes
since that was already done by running sysprep.exe -bmsd.

One last reboot, and then I prepare the image with:
sysprep.exe -quiet -pnp -reboot -reseal

Then I have it boot to DA and grab the image.

I hope this helps for the people that (like me) didn't realize they have to
redo the sysprep.

If anyone has a trick to bypass the whole re-storing and re-sysprepping of
the image, please feel free to respond to the thread.

Thanks,

Ruud

[email protected] said:
Joe, I read your findings but I am still unable to get my sysprep to
work properly. I am getting the same Inaccessable boot device error
message. I am trying to switch from a CPQ ML370 with a 5300 SCSI
adapter to a CPQ DL360 with a 5i SCSI adapter. Could you, or someone,
please take a look at my sysprep.inf file to see where my issue is?

[Unattended]
OemSkipEula = Yes
TargetPath = \WINNT
InstallFilesPath="c:\sysprep\i386"

[GuiUnattended]
OEMSkipRegional = 1
OemSkipWelcome = 1
Adminpassword=*

[UserData]
FullName = ***
OrgName = ***
ComputerName = ***
ProductID = ***

[LicenseFilePrintData]
AutoMode = PerSeat

[Identification]
JoinWorkgroup=workgroup

[Networking]
InstallDefaultComponents = Yes

[SysprepMassStorage]

SCSI\OtherCOMPAQ__SCSI_COMMUNICATECISS = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11 = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11 = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11 = "C:\scsi\drivers\cpqcissm.inf
Click to expand...
Click to expand...
 
Hi Chad,

here's a stripped version of the sysprep.inf that I use:

[Unattended]
OemSkipEula=Yes
InstallFilesPath=C:\sysprep\i386
TargetPath=\WINDOWS
KeepPageFile = 0
OemPnPDriversPath = "Drivers\Nic;Drivers\SCSI"

[Networking]
InstallDefaultComponents=Yes

;[Sysprep]
;BuildMassStorageSection = No

[SysprepMassStorage]

;Compaq Additional Drivers - Smart Array 5x and 6x - 24-01-2005

;Smart Array 5300
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11="c:\drivers\scsi\cpqcissm.inf"
; W2K Default.
PCI\VEN_0E11&DEV_B060="c:\drivers\scsi\cpqcissm.inf"

;Smart Array 5x
PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11="c:\drivers\scsi\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11="c:\drivers\scsi\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11="c:\drivers\scsi\cpqcissm.inf"
; W2K Default.
PCI\VEN_0E11&DEV_B178="c:\drivers\scsi\cpqcissm.inf"

;Smart Array 6x
PCI\VEN_0E11&DEV_0046&SUBSYS_40910E11="c:\drivers\scsi\cpqcissm.inf"
PCI\VEN_0E11&DEV_0046&SUBSYS_409A0E11="c:\drivers\scsi\cpqcissm.inf"
PCI\VEN_0E11&DEV_0046&SUBSYS_409B0E11="c:\drivers\scsi\cpqcissm.inf"
PCI\VEN_0E11&DEV_0046&SUBSYS_409C0E11="c:\drivers\scsi\cpqcissm.inf"
PCI\VEN_0E11&DEV_0046&SUBSYS_409D0E11="c:\drivers\scsi\cpqcissm.inf"
; W2K Default.
PCI\VEN_0E11&DEV_0046="c:\drivers\scsi\cpqcissm.inf"

;Resume sysprep.inf

As you can see, I commented (;) out the BuildMassStrorageSection, instead of
just setting it to no.

Hope this helps,

Ruud

[email protected] said:
Hi Ruud,

could you show me a copy of your sysprep.inf file so that I can compare
it against mine to make sure my syntext is correct? I'd really
appreciate it.

thanks,

chad
Hi Chad,

Thanks to Joe (2 thumbs up man) I was finally able to install the new
Click to expand...
DL380-G4 using ADS.
I had some issues getting it to work, even with all the findings mentioned
below.
Not sure if more people are struggling, I'm going to write down the steps I
took.
Forgive me if these are all very logical to you, but I was struggling with
the fact that I had to re-run the whole sysprep process.

I restored my Master Image (non-sysprepped) and ran the sysprep.exe -bmsd.
This popultaes the sysprep.ini file with all MassStorageDevices currently
known (and recognised) to the machine. This also includes controllers that
you don't have installed, but Win2k3 is capable of recognising.

Then I edited the sysprep.ini file, and inserted all info from the new 6i
Controller. As you already mentioned, make sure the format is correct !!!
I also commented out the:
;[Sysprep]
;BuildMassStorageSection = Yes
since that was already done by running sysprep.exe -bmsd.

One last reboot, and then I prepare the image with:
sysprep.exe -quiet -pnp -reboot -reseal

Then I have it boot to DA and grab the image.

I hope this helps for the people that (like me) didn't realize they have to
redo the sysprep.

If anyone has a trick to bypass the whole re-storing and re-sysprepping of
the image, please feel free to respond to the thread.

Thanks,

Ruud

[email protected] said:
Joe, I read your findings but I am still unable to get my sysprep to
work properly. I am getting the same Inaccessable boot device error
message. I am trying to switch from a CPQ ML370 with a 5300 SCSI
adapter to a CPQ DL360 with a 5i SCSI adapter. Could you, or someone,
please take a look at my sysprep.inf file to see where my issue is?

[Unattended]
OemSkipEula = Yes
TargetPath = \WINNT
InstallFilesPath="c:\sysprep\i386"

[GuiUnattended]
OEMSkipRegional = 1
OemSkipWelcome = 1
Adminpassword=*

[UserData]
FullName = ***
OrgName = ***
ComputerName = ***
ProductID = ***

[LicenseFilePrintData]
AutoMode = PerSeat

[Identification]
JoinWorkgroup=workgroup

[Networking]
InstallDefaultComponents = Yes

[SysprepMassStorage]

SCSI\OtherCOMPAQ__SCSI_COMMUNICATECISS = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11 = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11 = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11 = "C:\scsi\drivers\cpqcissm.inf"
PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11 = "C:\scsi\drivers\cpqcissm.inf
Click to expand...
Click to expand...
Click to expand...
 
Back
Top