stripped array

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

i have a stripped array using an on chip system setup in bios. there is a
driver, which i installed from the motherboard cd(not from a floppy during
windows installation).
my question is if the windows os goes down, will the onchip sata array
continue to exist and woudl the data still be there after reinstalling the
system?
thanks
frogeye
 
You must use the drivers from a floppy for the F6 option,either make youre
own and use the set up from the mfg,or use the floppy from them,a cd wont
work..Yes the array stays as is being that the 2 are always plugged in as
they
were set up,hd1 to SATA plug 1,hd2 to SATA 2,etc.....
 
I have an array. i did not use a floppy.

Andrew E. said:
You must use the drivers from a floppy for the F6 option,either make youre
own and use the set up from the mfg,or use the floppy from them,a cd wont
work..Yes the array stays as is being that the 2 are always plugged in as
they
were set up,hd1 to SATA plug 1,hd2 to SATA 2,etc.....
Click to expand...
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

System does not boot when connecting hard drive to SATA card vs on-boardSATA controller 5
Trying to Create a RAID 0 volume 9
bios bad? 4
Windows 10 One of my previous builds is experiencing random, multiple BSODs 9
RAID mirror degraded, replaced drive, now wgalogon hangs 5
Raid Controller and installing XP pro on raid 0 help 2
Disk drive not showing name in driver list 4
What is an Operating System? 32

Back
Top