Stop Error after SP4 Update

C

Chuck Mueller

PC was working fine before downloading and running the SP4
Update from the MS site. Now getting a Stop Error and Blue
Screen each time on bootup, Address 8042DD4C base at
80400000, Date Stamp 3ee6c002 - ntoskrnl.exe. Any ideas
would be appreciated. Thanks.
 
J

Jim

I have the same problem.
error is:
*** STOP: 0x0000000A (0x00000016,0x00000002,0x00000000,0x80432b2d)
*** Address 80432B2D base at 80400000, Datestamp 3ee6c002 - ntoskrnl.exe

that is the main part then,
etc. etc. etc.

I have looked everywhere and have not found a solution....

NEED HELP!!!! Jim
 
J

John Goodrich

Geeez and I thought it was me. I'm having the same problem.
I'm using the WIN2000 CD to do the Recovery, but every
time I reboot I have to do the recovery over. I'll be
following your post.

Thanks,
 
J

Jim

We are getting around this problem.... Here is how.

1st - we get the blue screen and can't proceed - requires restart or
shutoff
2nd - I do the restart in SAFE mode. PRESS F8 while restarting to do
safe mode restart
3rd - -I restart in normal mode after safe mode is started and I don't
get a blue screen

The next time I restart, I get the Blue screen and must do above
procedure.

This has worked every time - probably have done it 10 times so far....

A pain, but a temporary solution.....

If I get any answers, I will post here.... GOOD LUCK!!!
 
G

Guest

I have the same thing,
*** STOP: 0x0000000A (0xBAD0B0BC, 0x000000FF, 0x00000000,
0x80416B67) IRQL_NOT_LESS_OR_EQUAL

*** Address 80416B67 base at 80400000, DateStamp
3ee6c002 - ntoskrnl.exe

This occurs after installing sp4, everything had been
fine for some time prior to this. Any help would be
appreciated, I'll post an update if I figure it out.

Thanks
 
M

M

Oh, it was my Pinnacle DV200 IEEE 1394 card. No driver I
find will make it work with SP4. If anyone else is having
problems that are similar, just disable different devices
in Device Manager until it works, something you have isn't
supported.

Thanks,
M
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top