Standby and Shutdown problem

D

Donald Wyllie

Hi folks: I installed drivers for a Acard SCSI card and I can no longer
put the computer in Standby. The card works and talks to the Acer 610s
scanner but in Device Manager it says there is a problem. Someone
suggested uninstalling the driver and this would reset things. It
didn't. In "Start" "Shutdown Computer" the Standby button is greyed
out. Also, The computer won't shutdown but restarts. Restart
automatically is not checked in "System Failure." Any advice please.
Thanks, Donald
 
G

Guest

-----Original Message-----
Hi folks: I installed drivers for a Acard SCSI card and I can no longer
put the computer in Standby. The card works and talks to the Acer 610s
scanner but in Device Manager it says there is a problem. Someone
suggested uninstalling the driver and this would reset things. It
didn't. In "Start" "Shutdown Computer" the Standby button is greyed
out. Also, The computer won't shutdown but restarts. Restart
automatically is not checked in "System Failure." Any advice please.
Thanks, Donald

.
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Standby and Shutdown problems 2
Standby Problems 1
standby/shutdown issue 1
Standby problems 3
Another Standby & System Stanby Problem 6
StandBy / USB Mass Storage Device issue 4
XP Standby help!!! 4
Problem with Shutdown ..any ideas please 4

Top