R
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
J
Jack Ass
Ignore the previous message unless you want to ruin your system by installing
yet another spyware! Try this link instead:
Antispyware: v1.23.4343.0
http://go.microsoft.com/fwlink/?LinkID=85914&clcid=0x409
yet another spyware! Try this link instead:
Antispyware: v1.23.4343.0
http://go.microsoft.com/fwlink/?LinkID=85914&clcid=0x409
S
Stu
Thank you Randy. Appreciated.
Stu
Stu
A
Alan D
Thanks Randy.
I get no new immunisations this time round (version 1.4)
I get no new immunisations this time round (version 1.4)
R
Randy Knobloch
Stu said:Thank you Randy. Appreciated.
No problem, Stu - thanks the "thumb-up"...
Randy
R
Randy Knobloch
You should have - re-immunize several times ought to do it.Alan D said:Thanks Randy. You're most welcome, Alan.
I get no new immunisations this time round (version 1.4)
PING me if no joy.
Randy
A
Alan
Hi Randy,
Like Alan D, I had no additional immunizations after downloading the latest
definitions.
I've tried immunizing 5 times, and I keep receiving the same message as I
did the first time I tried to immunize: "All known bad products are already
blocked."
There are 39808 bad products blocked.
Alan
Like Alan D, I had no additional immunizations after downloading the latest
definitions.
I've tried immunizing 5 times, and I keep receiving the same message as I
did the first time I tried to immunize: "All known bad products are already
blocked."
There are 39808 bad products blocked.
Alan
A
Alan D
Immunising several times, I still kept getting the 'all bad products already
blocked' message, Randy - 39808 altogether.
Is something wrong, do you think?
blocked' message, Randy - 39808 altogether.
Is something wrong, do you think?
A
Alan D
I get 39808 too, Alan, after several immunisations that didn't seem to
achieve anything.
Are you still using version 1.4, like me?
achieve anything.
Are you still using version 1.4, like me?
A
Alan
Hi Alan D,
Yes, I'm still using v 1.4.
Alan
Yes, I'm still using v 1.4.
Alan
Alan D said:I get 39808 too, Alan, after several immunisations that didn't seem to
achieve anything.
Are you still using version 1.4, like me?
A
Alan D
Ah! I wonder if Randy is talking about 1.5?
Incidentally, Alan - have you noticed any change in the duration of a Spybot
scan at any time in the last couple of months? A scan used to take about 6
minutes on my machine, but now it takes about 20, and I haven't made any
substantial changes. I only use it once a week (when it updates), and I've
no idea when this change occurred. Is it just me?
Incidentally, Alan - have you noticed any change in the duration of a Spybot
scan at any time in the last couple of months? A scan used to take about 6
minutes on my machine, but now it takes about 20, and I haven't made any
substantial changes. I only use it once a week (when it updates), and I've
no idea when this change occurred. Is it just me?
A
Alan
Hello Alan,
No, it's not just you. On my newest (6 months old Dell) machine, with dual
processing and 2 Gb ram, the scan time used to be about 5 minutes. Now it's
easily close to 15 -- or more.
Alan
No, it's not just you. On my newest (6 months old Dell) machine, with dual
processing and 2 Gb ram, the scan time used to be about 5 minutes. Now it's
easily close to 15 -- or more.
Alan
A
Alan D
That's very useful to know, Alan - thanks very much.
R
Robinb
i took 1.5 off because it was taking too long to scan
robin
robin
A
Alan D
in message >i took 1.5 off because it was taking too long to
scan
You mean, even longer than 1.4 is now taking? We two Alans are both getting
scans taking 15-20 mins with 1.4 (whereas it used to take 5 or 6 minutes).
Was 1.5 even slower than that, Robin?
scan
You mean, even longer than 1.4 is now taking? We two Alans are both getting
scans taking 15-20 mins with 1.4 (whereas it used to take 5 or 6 minutes).
Was 1.5 even slower than that, Robin?
R
robinb
yes 1.5 was even slower
robin
robin
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.