sp2 crashed and i cant get to the restore,can it be done manually?

[Guest]

I installed the sp2 through out System Builder site and 1
computer has run fine since the other crashed during the
install. I tried to to do a lastgoodknown, or a safe mode
remove update too and neither will work. During the boot
up it says there is a " stop: c0000269 user32.dll was
relocated in memory .
then something about nt32dll.dll tried to occupy the same
memory space and an error occured . then it restarts.

1# Tried the recovery console ,after getting the SATA
drive recognized by installing the extra drivers in gets
to the screen asking for which os, c:\windows, then the
password . the i get the dos prompt and shortly after i
get a blue screen error about a cache access and it says
to disable cache in bios,which it is,.
So before i reinstall the os over and fight that fight,is
there a way to access the restore point through win 98 on
another ide drive i have and repair the sata drive files
or wind them back? I know i can reinstall it all over but
this is my System builder drive with tons of files and
programs for my business of pc repair and building.
usually a reinstall screws up so much i spend hours fixing
and reinstall all the programs anyway, but if it has to be
so be it, but if anyone has any ideas about fixinghte
drive from anothe os let me know asap
Thanks
System is running AMD barton runing 2300mgz 750mhz rdr ram,A7n8xdeluxe 2.0 version ,bios is 1007 the newest. 1 120gb SATA drive 1 cd-rw -1 dvdr w, nvidia 5200 128 video .

Gary L Greco

 

[Miss Perspicacia Tick]

I installed the sp2 through out System Builder site and 1
computer has run fine since the other crashed during the
install. I tried to to do a lastgoodknown, or a safe mode
remove update too and neither will work. During the boot
up it says there is a " stop: c0000269 user32.dll was
relocated in memory .
then something about nt32dll.dll tried to occupy the same
memory space and an error occured . then it restarts.

1# Tried the recovery console ,after getting the SATA
drive recognized by installing the extra drivers in gets
to the screen asking for which os, c:\windows, then the
password . the i get the dos prompt and shortly after i
get a blue screen error about a cache access and it says
to disable cache in bios,which it is,.
So before i reinstall the os over and fight that fight,is
there a way to access the restore point through win 98 on
another ide drive i have and repair the sata drive files
or wind them back? I know i can reinstall it all over but
this is my System builder drive with tons of files and
programs for my business of pc repair and building.
usually a reinstall screws up so much i spend hours fixing
and reinstall all the programs anyway, but if it has to be
so be it, but if anyone has any ideas about fixinghte
drive from anothe os let me know asap
Thanks
System is running AMD barton runing 2300mgz 750mhz rdr
ram,A7n8xdeluxe 2.0 version ,bios is 1007 the newest. 1 120gb SATA
drive 1 cd-rw -1 dvdr w, nvidia 5200 128 video .

Gary L Greco

So you failed to notice the warning in big red letters "THIS IS A BETA AND
MUST NOT BE USED ON PRODUCTION SYSTEMS" then?!

 

[Bruce Hagen]

Can't figure out why so many people insist on downloading SP2 when it
hasn't been released except to testers and Guinea Pigs. But ask at
their site:

SP2 Newsgroup:
http://communities.microsoft.com/newsgroups/default.asp?icp=xpsp2&slcid=us
--
Bruce Hagen
~IB-CA~

I installed the sp2 through out System Builder site and 1
computer has run fine since the other crashed during the
install. I tried to to do a lastgoodknown, or a safe mode
remove update too and neither will work. During the boot
up it says there is a " stop: c0000269 user32.dll was
relocated in memory .
then something about nt32dll.dll tried to occupy the same
memory space and an error occured . then it restarts.

1# Tried the recovery console ,after getting the SATA
drive recognized by installing the extra drivers in gets
to the screen asking for which os, c:\windows, then the
password . the i get the dos prompt and shortly after i
get a blue screen error about a cache access and it says
to disable cache in bios,which it is,.
So before i reinstall the os over and fight that fight,is
there a way to access the restore point through win 98 on
another ide drive i have and repair the sata drive files
or wind them back? I know i can reinstall it all over but
this is my System builder drive with tons of files and
programs for my business of pc repair and building.
usually a reinstall screws up so much i spend hours fixing
and reinstall all the programs anyway, but if it has to be
so be it, but if anyone has any ideas about fixinghte
drive from anothe os let me know asap
Thanks
System is running AMD barton runing 2300mgz 750mhz rdr

ram,A7n8xdeluxe 2.0 version ,bios is 1007 the newest. 1 120gb SATA
drive 1 cd-rw -1 dvdr w, nvidia 5200 128 video .

 

[Guest]

First of all i was part of a sytem builder group that was given the sp2 to test and implement by microsoft at a System Builder meeting .
Second ,I know its "beta" ,windows is still beta for that matter as far as i am concerned .
And i did post on technet and was asked to post around because more people in the public are using it and may have run across this problem and not reported it to microsoft. Which means it isnt in thier data base yet.
If you cant help then dont answer.
Thanks for your reply

 

[PCyr]

And where did he say that he was upset?

Ya see, people test betas so that they can find the flaws in the software.
If he's probably reported the bug already, but wants a solution as well from
anyone that has one.

--
Paul Cyr

-----

The Debate Continues... www.xvsxp.com

Protect Yourself and Others...
http://www.microsoft.com/athome/security/protect/
-----

 

[Guest]

Anybody have an resolution to this problem. After using MS update to upgrade
to XPSP2, I get a blue screen. All start up options, such as safe mode or
Last Know Good Config result in a blue screen.

 

[Bob I]

Review the options here.

http://support.microsoft.com/default.aspx?pr=windowsxpsp2

 

[Rock]

Anybody have an resolution to this problem. After using MS update to upgrade
to XPSP2, I get a blue screen. All start up options, such as safe mode or
Last Know Good Config result in a blue screen.

How to use the Automatic Recovery feature to recover your computer if
the Windows XP Service Pack 2 Setup program is not completed successfully
http://support.microsoft.com/?id=875355

How to remove Windows XP Service Pack 2 from your computer
http://support.microsoft.com/?id=875350

Installing Service Packs
http://www3.telus.net/dandemar/xpsp2.htm
http://www3.telus.net/dandemar/spackins.htm

Pre-Install, Install, Cleaning Up Afterwards
http://forum.aumha.org/viewforum.php?f=45

What to Know Before You Download and Install Windows XP Service Pack 2
http://www.microsoft.com/windowsxp/sp2/sp2_whattoknow.mspx

Get the Latest Updates and Information from Your PC Manufacturer Before
Installing Windows XP Service Pack 2
http://www.microsoft.com/windowsxp/sp2/oemlinks.mspx

The hard disk space requirements for Windows XP Service Pack 2
http://support.microsoft.com/?id=837783

Free Technical Support for SP2
http://support.microsoft.com/oas/default.aspx?ln=en-us&x=18&y=6&c1=509&gprid=6794&