SP2 and Stop error with CD Burner

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I installed SP2 and everything worked, except when I put any disc into my CD
Burner. It gives me a BSOD with a stop error. According to the error
reporting screen I get after a reboot, it claims to be the fault of my
graphics driver. Could this be the DIVX problem I have seen. I have a Radeon
9600, and updated to the most recent Catalyst driver.
My burner is a Sony CRX175A1. I have both EasyCD Creator 5 and Nero 5
installed.
I finally uninstalled SP2, and everything is working fine, again.
Any ideas?
 
did you try to reinstall the catalyst drivers after the SP2 install??
I've heard this works
peter
 
I didn't install the 4.7 driver until after I had installed SP2. This did not
seem to fix the problem.
 
I am running the 4.7 drivers on SP2 and have been for a while. I also
have Nero 6 Ultra installed. Have you tried removing the Roxio Software
and Nero Software and reinstall them? These BSOD's usually happen when
there is a Disk Detector or something that tries to detect when a blank
CD has been inserted. DirectCD is a culprit too.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

External DVD Burner Problems 6
PC no longer recognizing CD burner, DVD burner and floppy drive 6
dvd/cd burner won't burn 2
liteon cd/dvd not recognized by windows 3
DVD Burner becomes CD when blank media is inserted 4
Do CD burners come with Burning software? 20
CD Burner 1
CD burner cannot recognize blank disc 3

Back
Top