sony cd-rw quit working for no apparent reason

G

Guest

Hi,
I have a Sony Vaio PC that used to burn files and music to CD when I
occasionally needed it to do so.
Now, it will play a music CD, but when I select files to copy to CD, it
keeps telling me there's no blank CD in the drive.
I've been working on this for at least a week and am getting extremely
frustrated.
I went to the Sony site and downloaded some sort of test to see if the
hardware is functioning properly.
The drive started right up and passed the tests with flying colors.
When I tried again with my own files, the same message to insert a cd into
the drawer appeared.
I've tried disabling the drive and reinstalling, and all I succeeded in
doing was making the new hardware notice pop up multiple times every time I
start up the computer so that I have to waste the first 5 minutes cliking OK
and then a message comes up saying hardware may not perform as expected.
That I know!
Any suggestions?
The drive is Sony cd-rw crx175e
The other drive is Pioneer dvd-rom dvd 117r
Thanks,
Gail
 
N

Nathan McNulty

The wording was a little odd, so let me try to recap. Your drive is
functioning properly by playing music CD's, but when you try to write
data to a blank CD, it tells you to insert a blank CD even though you
just did insert a blank CD?

There are a couple of things to consider here. First off, what are you
trying to write to the CD. There are maximum capacities that a CD can
hold and it will continue to ask for a blank disk until one with enough
capacity is inserted. The limit is usually 700 MB or 80 Minutes of
music. Make sure you are not trying to write more than that.

Second, you can take a look here:
http://support.microsoft.com/default.aspx?scid=kb;en-us;324129
http://support.microsoft.com/default.aspx?scid=kb;en-us;321641
 
T

Trent©

The wording was a little odd, so let me try to recap. Your drive is
functioning properly by playing music CD's, but when you try to write
data to a blank CD, it tells you to insert a blank CD even though you
just did insert a blank CD?

There are a couple of things to consider here. First off, what are you
trying to write to the CD. There are maximum capacities that a CD can
hold and it will continue to ask for a blank disk until one with enough
capacity is inserted.

That's interesting. I've never seen that.

What program does this?


Have a nice week...

Trent

What do you call a smart blonde?
A golden retriever.
 
T

Trent©

On Sun, 8 Aug 2004 16:43:01 -0700, "Gail"

There's another post similar to yours just recently. You might want
to get together with him...to see what things (additions to
software/hardware, etc.) you may have in common. That may help both
of you to solve your problems.
I have a Sony Vaio PC that used to burn files and music to CD when I
occasionally needed it to do so.
Now, it will play a music CD, but when I select files to copy to CD, it
keeps telling me there's no blank CD in the drive.

Are you sure which drive its looking for? Go into Device Manager and
temporarily disable the other drive.
I've been working on this for at least a week and am getting extremely
frustrated.

What changes did you make...a week ago...that may be causing the
problem? Any new anti-virus definitions?...any Norton stuff?...and
new hardware?...etc.
I went to the Sony site and downloaded some sort of test to see if the
hardware is functioning properly.
The drive started right up and passed the tests with flying colors.

WHICH drive?
When I tried again with my own files, the same message to insert a cd into
the drawer appeared.

What burning program are you using?
I've tried disabling the drive and reinstalling, and all I succeeded in
doing was making the new hardware notice pop up multiple times every time I
start up the computer so that I have to waste the first 5 minutes cliking OK
and then a message comes up saying hardware may not perform as expected.

Disable one drive at a time...then try a burn on each enabled drive.
If they seem to work fine by themselves, enable both and check for any
conflicts in device manager. Look at the settings...don't just look
for the exclamations.
That I know!
Any suggestions?
The drive is Sony cd-rw crx175e
The other drive is Pioneer dvd-rom dvd 117r

Consider getting a different brand/better quality cd.

Good luck...let us know.


Have a nice week...

Trent

What do you call a smart blonde?
A golden retriever.
 
N

Nathan McNulty

Nero, for one, does this. If it is unable to burn because the amount of
data exceeds the amount of available space on a disk, it will spit the
CD out and ask you to insert a blank disc. The older version did not
say why, but now it gives a little note that you have to look for
explaining that the CD you inserted did not have enough free space.

I am not sure how many other programs do this, but I would have to guess
that most of them do. Burning software is not able to write very much
more data than the supposed max capacity of a CD and usually spits the
CD out and asks for a larger capacity CD with the "PLease insert a blank
CD" message.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top