A
Aaron Zammit
I have a new PC with this comfiguration:
Pentium 4 PC 2.6Ghz processor C Version (800MHz FSB)
1Gb RAM
ASUS Nvidia graphics card FX5200
IC7-G motherboard Abit
120Gb HDD
With this configuration the settlers 4 is giving me an error Fatal
exception divide by zero message with the following trace file:
.......
[ 10/11/2003 17:09:57 ] Exception 0xc0000094 at 0x004e19a6!
S4_Main.exe (time stamp 0x3de21761) caused an integer divide by zero
exception in
module S4_Main.exe (time stamp 0x3de21761, base address 0x00400000)
at 001b:004e19a6.
Registers:
EAX=000004b8 CS=001b EIP=004e19a6 EFLGS=00010246
EBX=0f885950 SS=0023 ESP=0012e8b8 EBP=0012e8fc
ECX=4da9be90 DS=0023 ESI=000004b8 FS=003b
EDX=00000000 ES=0023 EDI=00000000 GS=0000
.......
I tried it out on another pentium 4 machine without any problem. But
on this PC the FSB was 533Mhz and with 512Mb RAM.
Any ideas on what there could be wrong? I installed the settlers 4 on
a 2nd partition (maybe it could be a problem... i doubt it..)
Regards,
Aaron
Pentium 4 PC 2.6Ghz processor C Version (800MHz FSB)
1Gb RAM
ASUS Nvidia graphics card FX5200
IC7-G motherboard Abit
120Gb HDD
With this configuration the settlers 4 is giving me an error Fatal
exception divide by zero message with the following trace file:
.......
[ 10/11/2003 17:09:57 ] Exception 0xc0000094 at 0x004e19a6!
S4_Main.exe (time stamp 0x3de21761) caused an integer divide by zero
exception in
module S4_Main.exe (time stamp 0x3de21761, base address 0x00400000)
at 001b:004e19a6.
Registers:
EAX=000004b8 CS=001b EIP=004e19a6 EFLGS=00010246
EBX=0f885950 SS=0023 ESP=0012e8b8 EBP=0012e8fc
ECX=4da9be90 DS=0023 ESI=000004b8 FS=003b
EDX=00000000 ES=0023 EDI=00000000 GS=0000
.......
I tried it out on another pentium 4 machine without any problem. But
on this PC the FSB was 533Mhz and with 512Mb RAM.
Any ideas on what there could be wrong? I installed the settlers 4 on
a 2nd partition (maybe it could be a problem... i doubt it..)
Regards,
Aaron