set tab or enter keys to automatically move to different cells

[Guest]

I'm working with an invoice document that someone created on Excel 2003.
It's a great document, but we want to program either the TAB key or the ENTER
key to move to a different cell within the worksheet. Example: After typing
the Date, enter automatically to Invoice Number, then enter automatically to
Company Name, and so on. Is there a way to start at cell N1 ,then program
the Enter key to automatically go to cell N7 after that, then C9 after that
and so on.

Any information is GREATLY appreciated!

 

[Ian]

You won't be able to move in the order you quoted in your post, but you
could leave the required cells unlocked and tab between them. This method
works by rows, that is, it looks for the next available cell on the current
row and if it doesn't find any tries the next row and so on until it finds
an unlocked cell. If you save the file with N1 selected, it would tab to N7
then C9 and back to N1. Obviously there are more cells you need, but it
might be worth a look.

Select each of the cells you want to populate and set the cell protection to
unlocked (Format>Cells>Protection> uncheck Locked). Once this is done,
protect the worksheet (Tools>Protection>Protect Sheet). By using tab, you
will automatically jump to the next available cell, those available are the
ones you have unlocked.

 

[Gord Dibben]

J9Y

Assuming your range of cells to be A1, B2, C3, F4, A2, F1 for example.

Select the Second cell(B2) you want in the range then CRTL + click your way
through the range in the order you wish, ending with the First cell(A1). Name
this range under Insert>Name>Define>OK.

Now click on NameBox(top left corner above row 1 and col A), select the range
name to highlight the range. With these cells selected, you can input data
and Tab or Enter your way through the range in the order you selected.

Note: there is a limit of about 25 - 30 cells to a range using this method due
to a 255 character limit in a named range. Longer sheet names will reduce the
number of cells considerably.

If more needed, you can enter them manually in the "refers to" box.

From Debra Dalgleish.....

The limit is 255 characters in the Name definition. For example, I can
define a range of 46 non-contiguous cells, with the following string:

=$B$2,$D$2,$F$2,$H$2,$J$2,$B$4,$D$4,$F$4,$H$4,$J$4,$B$6,$D$6,$F$6,$H$6,
$J$6,$B$8,$D$8,$F$8,$H$8,$J$8,$B$10,$D$10,$F$10,$H$10,$J$10,$B$12,$D$12,
$F$12,$H$12,$J$12,$B$14,$D$14,$F$14,$H$14,$J$14,$B$16,$D$16,$F$16,$H$16,
$J$16,$B$18,$D$18,$F$18,$H$18,$J$18,$L$3

There is a third method which requires VBA and a Worksheet_Change event.

''moves from C2 through E5 at entry
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$C$2"
Range("C5").Select
Case "$C$5"
Range("E2").Select
Case "$E$2"
Range("E5").Select
'add more cells and Cases here as the above pattern shows.
End Select
End Sub


Gord Dibben Excel MVP

 

[Guest]

If you have a new column that has the data in the order that you want them
entered such as column X.

Then highlight the first cell to receive data...hit = key.....highlight the
cell in X...hit enter. So the invoice problem...you probably don't want
column X to print out. You need to define a print area. Highlight what
should be printed out. Click on File...Print Area....Set Print Area.

 

[Guest]

Thanks for your reply - I really appreciated your response.

 

[Guest]

Thanks for the advice - it worked great and saved me alot of time!

 

[Guest]

Thanks for the reply - I really appreciate your response!

 

[Guest]

I was attempting to follow your instructions for tab order and when I choose
Insert-Name-Define. Define is not able to be chosen. I have 2003 version.
Any suggestions?

 

[Gord Dibben]

Perhaps your worksheet is protected.

Look under Tools>Protection to see if Unprotect Sheet is available.

You may have to supply a password.


Gord