M
Mike W
When I fill down or copy and paste formats only, I
continue to get a 'Selection too large' popup. It's
happened on several different spreadsheets over a few
weeks, so it's not an isolated incident.
The PC I work from (a P4-2.8, 512MB RAM) was upgraded
recently, as was Excel 2003, and I don't remember this
being an issue using Excel 97 on a P4-2.4, 256MB system
which I had prior to the upgrade.
Also, we're running Windows 2000 on a Novell network.
My config.sys has the following lines which may have some
or no bearing on the problem:
Files=40
Buffers=40
Stacks=9,256
Device=C:\Dos\EMM386.exe noems
Is there a network buffer setting that could be limiting
this, too?
Thank you.
continue to get a 'Selection too large' popup. It's
happened on several different spreadsheets over a few
weeks, so it's not an isolated incident.
The PC I work from (a P4-2.8, 512MB RAM) was upgraded
recently, as was Excel 2003, and I don't remember this
being an issue using Excel 97 on a P4-2.4, 256MB system
which I had prior to the upgrade.
Also, we're running Windows 2000 on a Novell network.
My config.sys has the following lines which may have some
or no bearing on the problem:
Files=40
Buffers=40
Stacks=9,256
Device=C:\Dos\EMM386.exe noems
Is there a network buffer setting that could be limiting
this, too?
Thank you.