Scsi disk error? Toss the disk?

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I can hear my disk seek as if it were stuck for 3 or 4 seconds.
SCSI Adaptec 3924, Fujitsu 38meg HD (15,000 rpm) (one of 4)

Alert log says I have a bad block and provides this message.
Question is, from this, which freaking disk is it and is there something
here that
tells me where on the disk it is?

Question also is what to do? Microsoft says to toss the disk. !!!????
-------------


http://support.microsoft.com/kb/182335/EN-US/
Article ID : 182335



typedef struct _IO_ERROR_LOG_PACKET { // Offset: Length:
UCHAR MajorFunctionCode; // 0x00 1
UCHAR RetryCount; // 0x01 1
USHORT DumpDataSize; // 0x02 2
USHORT NumberOfStrings; // 0x04 2
USHORT StringOffset; // 0x06 2
USHORT EventCategory; // 0x08 2
// 0x0a 2 padding bytes
NTSTATUS ErrorCode; // 0x0c 4
ULONG UniqueErrorValue; // 0x10 4
NTSTATUS FinalStatus; // 0x14 4
ULONG SequenceNumber; // 0x18 4
ULONG IoControlCode; // 0x1c 4
LARGE_INTEGER DeviceOffset; // 0x20 8
ULONG DumpData[1]; // 0x28 SCSIPORT specific
}IO_ERROR_LOG_PACKET, *PIO_ERROR_LOG_PACKET;





0000: 03 00 68 00 01 00 b6 00 ..h...¶.
0008: 00 00 00 00 07 00 04 c0 .......À
0010: 00 01 00 00 9c 00 00 c0 ....œ..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 34 4b 00 04 00 00 00 .4K.....
0028: e7 28 08 00 00 00 00 00 ç(......
0030: ff ff ff ff 00 00 00 00 ÿÿÿÿ....
0038: 40 00 00 84 02 00 08 00 @..„....
0040: 16 20 0a 12 42 03 00 00 . ..B...
0048: 00 0a 00 00 0a 00 00 00 ........
0050: 00 00 00 00 b8 6e c9 81 ....¸nÉÂ
0058: 00 00 00 00 98 12 ca 81 ....˜.ÊÂ
0060: 38 51 0e 82 95 25 00 02 8Q.‚•%..
0068: 28 00 02 00 25 95 00 00 (...%•..
0070: 08 00 00 00 00 00 00 00 ........
0078: f0 00 03 02 00 25 9a 18 ð....%š.
0080: 00 00 00 00 11 00 00 80 .......€
0088: 00 53 00 00 00 00 00 00 .S......



0000: 00680003 00b60001 00000000 c0040007
0010: 00000100 c000009c 00000000 00000000
0020: 24661800 00000002 0007ec9c 00000000
0030: ffffffff 00000001 84000040 00080002
0040: 120a2003 40000342 00000a00 0000000a
0050: 00000000 81c96eb8 00000000 81ca1298
0060: 820e5138 01123307 12010028 00000733
0070: 00000008 00000000 010300f0 180c3312
0080: 00000000 80000011 00005300 00000000

MajorFunctionCode = 03
RetryCount= 00
DumpDataSize = 0068
NumberOfStrings= 0001
StringOffset = 00b6
EventCategory = 0000
padding = 0000
ErrorCode (IO_ERR_xxx) = c0040007
UniqueErrorValue= 00000100
ASCSII = 00 00
257
FinalStatus = 00000000

SequenceNumber= 00000000

IoControlCode = 00000000
DeviceOffset = 24661800 00000002
PathId = 0007ec9c
TargetId = 00000000
Lun = ffffffff
ErrorCode (SP_xxx)= 00000001
 
All disk mfg have a DOS utility you can download to a MS-DOS formated floppy,
Boot to floppy,run the tests.

Jpc said:
I can hear my disk seek as if it were stuck for 3 or 4 seconds.
SCSI Adaptec 3924, Fujitsu 38meg HD (15,000 rpm) (one of 4)

Alert log says I have a bad block and provides this message.
Question is, from this, which freaking disk is it and is there something
here that
tells me where on the disk it is?

Question also is what to do? Microsoft says to toss the disk. !!!????
-------------


http://support.microsoft.com/kb/182335/EN-US/
Article ID : 182335



typedef struct _IO_ERROR_LOG_PACKET { // Offset: Length:
UCHAR MajorFunctionCode; // 0x00 1
UCHAR RetryCount; // 0x01 1
USHORT DumpDataSize; // 0x02 2
USHORT NumberOfStrings; // 0x04 2
USHORT StringOffset; // 0x06 2
USHORT EventCategory; // 0x08 2
// 0x0a 2 padding bytes
NTSTATUS ErrorCode; // 0x0c 4
ULONG UniqueErrorValue; // 0x10 4
NTSTATUS FinalStatus; // 0x14 4
ULONG SequenceNumber; // 0x18 4
ULONG IoControlCode; // 0x1c 4
LARGE_INTEGER DeviceOffset; // 0x20 8
ULONG DumpData[1]; // 0x28 SCSIPORT specific
}IO_ERROR_LOG_PACKET, *PIO_ERROR_LOG_PACKET;





0000: 03 00 68 00 01 00 b6 00 ..h...¶.
0008: 00 00 00 00 07 00 04 c0 .......À
0010: 00 01 00 00 9c 00 00 c0 ....œ..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 34 4b 00 04 00 00 00 .4K.....
0028: e7 28 08 00 00 00 00 00 ç(......
0030: ff ff ff ff 00 00 00 00 ÿÿÿÿ....
0038: 40 00 00 84 02 00 08 00 @..„....
0040: 16 20 0a 12 42 03 00 00 . ..B...
0048: 00 0a 00 00 0a 00 00 00 ........
0050: 00 00 00 00 b8 6e c9 81 ....¸nÉÂ
0058: 00 00 00 00 98 12 ca 81 ....˜.ÊÂ
0060: 38 51 0e 82 95 25 00 02 8Q.‚•%..
0068: 28 00 02 00 25 95 00 00 (...%•..
0070: 08 00 00 00 00 00 00 00 ........
0078: f0 00 03 02 00 25 9a 18 ð....%š.
0080: 00 00 00 00 11 00 00 80 .......€
0088: 00 53 00 00 00 00 00 00 .S......



0000: 00680003 00b60001 00000000 c0040007
0010: 00000100 c000009c 00000000 00000000
0020: 24661800 00000002 0007ec9c 00000000
0030: ffffffff 00000001 84000040 00080002
0040: 120a2003 40000342 00000a00 0000000a
0050: 00000000 81c96eb8 00000000 81ca1298
0060: 820e5138 01123307 12010028 00000733
0070: 00000008 00000000 010300f0 180c3312
0080: 00000000 80000011 00005300 00000000

MajorFunctionCode = 03
RetryCount= 00
DumpDataSize = 0068
NumberOfStrings= 0001
StringOffset = 00b6
EventCategory = 0000
padding = 0000
ErrorCode (IO_ERR_xxx) = c0040007
UniqueErrorValue= 00000100
ASCSII = 00 00
257
FinalStatus = 00000000

SequenceNumber= 00000000

IoControlCode = 00000000
DeviceOffset = 24661800 00000002
PathId = 0007ec9c
TargetId = 00000000
Lun = ffffffff
ErrorCode (SP_xxx)= 00000001
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

what causes disk errors when coming out of standby ? 2
Windows - Application Error - The memory could not be read! 1
Execl DrWatson Error 80000007 3
ATAPI errors Trouble With My CDRW/DVD Drive 5
Svchost.exe Errors 9
Registry Problems and missing files 9
How can I fix these errors..... 16
Disk error 13

Back
Top