SATA SEAGATE 120Gb - UDMA-5

G

Guest

I have an ASUS P4C800 Dlx ( chipset 875P ) with 1 SATA SEAGATE 120Gb (...26AS) NON-RAID.

When plugged on PROMISE port the windows XP shows as SCSI UDMA-6 IDE-SATA....but when plugged on INTEL ICH5, windows reports IDE - UDMA-5

Why ????
 
G

Guest

What is your board capable of ??? most boards over a year old are only capable of dma/5 100mb's that is what the drive is going to show. The scsi card is dma 6/ 133mb's
 
G

Guest

Thank´s to answer Bobs, but my mobo is new......Asus launch at 2003.....P4C800 DELUX

This MOBO have 2 IDE=100mbs + 2 SATA on PROMISE CHIPSET ( this shows UDMA-6 on Win XP ) + 2 SATA on INTEL 875P CHIPSET ( ICH5 - shows UDMA-5

Strange is INTEL to report on site your chipset as UDMA-6....Seagate reports on site your HDD as SATA-150....Asus reports as Windows XP bug

Using AIDA32 on promise I have UDMA-6....on Intel I have UDMA-
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

SATA Drives: Why Only UDMA 5 And Not 6? 2
System does not boot when connecting hard drive to SATA card vs on-boardSATA controller 5
Is there anyway to get UDMA transfer mode back on Sata Drives? 4
IDE bus won't run UDMA 5 10
General Question about SATA 5
P4C800 Deluxe & SATA problem 5
SATA 3.0Gb/s drive shows UDMA 0 instead of UDMA 6? 3
SATA drive stuck in PIO mode 18

Top