samsung laser power save mode

  • Thread starter Thread starter mk
  • Start date Start date
M

mk

ml 2510 printer

When Power Saver mode is active, after 5+ minutes printer is not 'woken
up' by print command from PC. I have to turn it off then back on before
usb connection is established.

Is this normal?
Thanks
 
Do next maybe it will help.

Go to device manager (right click My computer -> Properties -> Hardware ->
Device manager) . Open USB controllers, go to USB Root hub, then right
click -> Properties -> Power managment -> you must dissable ALLOW THE
COMPUTER TO TURN OFF THIS DEVICE FOR SAVE POWER
You must do this for all USB Root hubs that you have on your computer. Then
restart computer.

Tomislav
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Connecting a Samsung ML-4500 to USB 3
How to make darker the print of a Samsung ML-4500 b&w laser printer? 4
Samsung ML-2010 power issue 2
Postscript still important for laser printers? How much RAM is enough? LexMark? 45
Samsung Laser Refill Problem, HP 1018 any better for refill? 10
Toner Save mode for Samsung CLP-300? 2
HP LaserJet P1102w - Wireless problems if powered off 4
Samsung ML-1440 Network Printing? 1

Back
Top