Routing

[Brandon]

Hi,
I have a routing problem on a Windows Server 2003 that I am busy configuring
as a router. I have two subnets, 192.168.2.0 and 192.168.9.0 and the Windows
server is the router. I have enabled IP forwarding in the registry and
configured RRAS as a LAN router. Clients on the 192.168.2.0 network can ping
all clients on the 192.168.9.0. But clients on the 192.168.9.0 network can
only ping the router 192.168.2 interface, and no other clients on that
network.
Please advise on where I am going wrong.
Thank you in advance.

This is the routing table:

IPv4 Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x10003 ...00 03 ff a1 1a 61 ...... Intel 21140-Based PCI Fast Ethernet
Adapter (Generic) #2
0x10004 ...00 03 ff a2 1a 61 ...... Intel 21140-Based PCI Fast Ethernet
Adapter (Generic)
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.2.0 255.255.255.0 192.168.2.222 192.168.2.222 20
192.168.2.222 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.2.255 255.255.255.255 192.168.2.222 192.168.2.222 20
192.168.9.0 255.255.255.0 192.168.9.1 192.168.9.1 20
192.168.9.1 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.9.255 255.255.255.255 192.168.9.1 192.168.9.1 20
224.0.0.0 240.0.0.0 192.168.2.222 192.168.2.222 20
224.0.0.0 240.0.0.0 192.168.9.1 192.168.9.1 20
255.255.255.255 255.255.255.255 192.168.2.222 192.168.2.222 1
255.255.255.255 255.255.255.255 192.168.9.1 192.168.9.1 1
===========================================================================
Persistent Routes:
None

 

[Brandon]

My appologies for posting this question.
I should have applied something like occam's razor.
I forgot to change the DHCP scope to point to the new DG
All sorted now.
Thanks.