Routing

[Guest]

I have a PC on our internal lan with an IP of 10.0.0.100, SM=255.255.255.0,
DG=10.0.0.253

The Windows 2000 server has 2 NICs with the following IP's
First NIC IP=10.0.0.2,SM=255.255.255.0
Second NIC IP=192.168.1.2,SM=255.255.255.0,DG=192.168.1.254

Pix Firewall is at IP=192.168.1.254 - This PIX has a VPN Tunnel to a second
site with a PIX. There is also a Microsoft RRAS VPN between the 2 sites.
The server at the second site is Windows 2003 with 2 NIC's.

3COM Firewall is at IP=10.0.0.253

Is there a way to force the PC's to send traffic to the second site thru the
PIX VPN rather than the Microsoft VPN without chnaging the defualt gateway on
the PC ? The default gateway on the PC currently points to the 3Com firewall
because we want to use the faster cable modem that is attached to it. The
PIX firewall is connected to a DSL line.

Thanks for any recommendations.

Ray

 

[Doug Sherman [MVP]]

Well , you don't tell us anything about the IP for MS RRAS VPN, but on the
PC try:

route add <NetworkAddressof RemoteSubnet> mask <SubnetMaskofRemoteSubnet>
10.0.0.2

Doug Sherman
MCSE, MCSA, MCP+I, MVP

 

[Phillip Windell]

Choose one device to handle LAN routing.

Point the DG of all the machines to it.

Set the routes on it to direct traffic to the correct VPN device for where
it needs to go.

Your LAN machines are using 10.0.0.253, yet I dd not see any device using
that IP#.

 

[Guest]

3COM Firewall is at IP=10.0.0.253

Choose one device to handle LAN routing.

Point the DG of all the machines to it.

Set the routes on it to direct traffic to the correct VPN device for where
it needs to go.

Your LAN machines are using 10.0.0.253, yet I dd not see any device using
that IP#.

--

Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com

I have a PC on our internal lan with an IP of 10.0.0.100, SM=255.255.255.0,
DG=10.0.0.253

The Windows 2000 server has 2 NICs with the following IP's
First NIC IP=10.0.0.2,SM=255.255.255.0
Second NIC IP=192.168.1.2,SM=255.255.255.0,DG=192.168.1.254

Pix Firewall is at IP=192.168.1.254 - This PIX has a VPN Tunnel to a second
site with a PIX. There is also a Microsoft RRAS VPN between the 2 sites.
The server at the second site is Windows 2003 with 2 NIC's.

3COM Firewall is at IP=10.0.0.253

Is there a way to force the PC's to send traffic to the second site thru the
PIX VPN rather than the Microsoft VPN without chnaging the defualt gateway on
the PC ? The default gateway on the PC currently points to the 3Com firewall
because we want to use the faster cable modem that is attached to it. The
PIX firewall is connected to a DSL line.

Thanks for any recommendations.

Ray