Routing with Multple IP's

  • Thread starter Jonathan Martinez
  • Start date
J

Jonathan Martinez

I would like to know if this is possible.

I have multple public IP's assigned to my WAN nic in windows server 2008
(66.66.66.66; 66.66.66.67; 66.66.66.74). I have NAT enabled to route traffic
from the LAN for a couple of domain controllers. On this routing server I
also have a public DNS and mail server. Is it possible to use only 1 of my
public IPs for the NAT and leave the rest for windows using the windows built
in firewall? I want to assign 66.66.66.67:25, 66.66.66.67:110, 66.66.66.74:53
using windows firewall with advanced security. and use RRAS to forward all
internet traffic through 66.66.66.66
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Reroute specific IP's only 1
Routing between 2 RRAS servers 1
Help setting VPN (RRAS) on W2K Advanced Server behind a router. 6
How do I set up routing to route static IP's? 2
How to create to public to private IP mapping in 2003 RRAS 4
Setting up RRAS through a firewall 2
Routing using rras and public ip addresses 1
Routing and Remote access 1

Top