Routing And Remote Access

[Jim Potter]

My Win2k Domain Controller is setup with AD, DNS, DHCP,
and Routing and remote access.
The server has a static IP address and one NIC, but since
RRAS has been installed, it gets an additional DHCP
address on a WAN (PPP/SLIP) Interface.
This is a problem because local machines are pinging the
WAN interface that gets registered in DNS and not the
fixed IP address of the NIC.
Any suggestions as how to set this up so that it doesnt
register the address in DNS?
thanks,
Jim

 

[Steven L Umbach]

You can configure that according to the KB link below. Read the whole
article as having rras on a domain controller will probably result in
browsing issues for network clients, especailly if that domain controller is
the PDC fsmo role holder. --- Steve

http://support.microsoft.com/default.aspx?scid=kb;en-us;289735