Had you already opened case and found it abnormal?
Often the front bezel (plastic face plate) is removed to expose a
screw or two holding a bay that slides out along rails stamped
into the metal sides/bottom. First check for access to these
screws on the inside of case.
Typically drive and bay holding it, come out together then drive
can be removed from bay.
Had you already opened case and found it abnormal?
Often the front bezel (plastic face plate) is removed to expose a
screw or two holding a bay that slides out along rails stamped
into the metal sides/bottom. First check for access to these
screws on the inside of case.
Typically drive and bay holding it, come out together then drive
can be removed from bay.
May be near dead anyway, throw it at the pavement a couple times
and hit the circuit board with a hammer... more elaborate
destruction may be fun but unlikely to be necessary.
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.