Remote Procedure Call

G

Guest

I am trying to update Windows XP Pro after having re-installed Windows on my PC. It gets so far into the downlaod and then I get a message advising me that the system is about to be shutdown. It advises that this is initiated by NT Authority System and due to Remote Authority Call terminated unexpectedly. Please help
 
G

Guest

And this removes the worm on his computer how??
-----Original Message-----
Restart ur computer at administrator then go to control
panel then (select switch to classical view if not done)
then Administrative tools>Services>Remote Procedure Call
(PRC)>Recovery>3 boxes there...select Take no action to
all...>OK aply watever...ur done it SHOULD be done....
 
G

Guest

Your computer is now infected with the W32.Blaster.Worm or
one of its variants. This happened because you have not
been using an internet connection firewall and have
apparently neglected to install the critical updates
available at the Windows Update website.
-----------------------------------------------------------
-------
If your computer is constantly attempting to shutdown
or reboot, quickly go to:

Start > Run and type: CMD , and hit enter.
This opens the Command Prompt window.

Then type: shutdown -a , and hit enter.

This should halt the rebooting problem.
-----------------------------------------------------------
-------
Then immediately turn-on Windows XP's built-in Firewall:
http://www.microsoft.com/security/protect/
(To enable the built-in firewall, go to:
Control Panel, double-click Networking and Internet
Connections, then click Network Connections. Right-click
your connection, then
Click Properties, and on the Advanced tab, click the option
"Protect my computer and network..." Note: the built in
firewall only monitors incoming traffic not outgoing (ie
spyware, trojans, etc.. you may have on your system).)

Special note if you use AOL:
America Online installs its own connection settings that
override
the ones that come with Windows XP. America Online's
connection settings don't include a way to turn on Windows
XP's
built-in firewall.


What You Should Know About the Blaster Worm and Its
Variants
http://www.microsoft.com/security/incident/blast.asp

A tool is available to remove Blaster worm and Nachi worm
infections from computers
that are running Windows 2000 or Windows XP
http://support.microsoft.com/?kbid=833330

A security issue has been identified that could allow an
attacker to
remotely compromise a computer running Microsoft Windows
and
gain complete control over it. You can help protect your
computer
by installing this update from Microsoft.
http://www.microsoft.com/downloads/details.aspx?
FamilyId=2354406C-C5B6-44AC-9532-
3DE40F69C074&displaylang=en

Above courtesy of MVP Carey
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

***Install a good firewall. ZoneAlarm is a free one you
can install.
Install a good anti-virus program making sure you keep
it's definitions up to date! ***
- - - - - - - - - - - - -
Microsoft Security Bulletin MS03-39
http://support.microsoft.com/?kbid=824146

What You Should Know About the Blaster Worm
http://www.microsoft.com/security/incident/blast.asp

Protect Your PC
http://www.microsoft.com/security/protect/default.asp

W32.Blaster.Worm a.k.a. W32/Lovesan.Worm
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm
..html

W32.Blaster.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm
..removal.tool.html

W32.Welchia.Worm a.k.a. W32/Nachi.Worm
http://securityresponse.symantec.com/avcenter/venc/data/w32
..welchia.worm.html

W32.Welchia.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.welchia.worm
..removal.tool.html
-----Original Message-----
I am trying to update Windows XP Pro after having re-
installed Windows on my PC. It gets so far into the
downlaod and then I get a message advising me that the
system is about to be shutdown. It advises that this is
initiated by NT Authority System and due to Remote
Authority Call terminated unexpectedly. Please help
 
G

Guest

Is this to say that I picked up this virus during the initial loading of the updates? I had completely repartitioned my machine before reloading Windows and then went straight to the Windows update site. I have always had Norton 2003 on my machine and set to scan all files every day and I also ran Norton after this problem but no virus was reported. If the virus is on my machine should Norton see it?
 
B

Bruce Chambers

Greetings --

If you connected the PC to the Internet without having first
enabled a firewall, without having first installed an antivirus
application with current virus definition files, and before installing
the KB824146 Hotfix, you're very likely to get infected from any of
the thousands of PCs on the Internet that are constantly broadcasting
the Blaster and/or Welchia worms. It only takes a few seconds of
exposure.

To stay on-line long enough to get the necessary updates, patches,
and removal tools, click Start > Run, and enter "shutdown -a" when the
next RPC countdown begins. This will abort the shut down. Also, make
sure you've enabled a firewall before starting, to preclude any more
intrusions while getting the updates/patches/tools.

Microsoft Security Bulletin MS03-39
http://support.microsoft.com/?kbid=824146

What You Should Know About the Blaster Worm
http://www.microsoft.com/security/incident/blast.asp

W32.Blaster.Worm a.k.a. W32/Lovesan.Worm
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm.html

W32.Blaster.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm.removal.tool.html

W32.Welchia.Worm a.k.a. W32/Nachi.Worm
http://securityresponse.symantec.com/avcenter/venc/data/w32.welchia.worm.html

W32.Welchia.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.welchia.worm.removal.tool.html

McAfee AVERT Stinger
http://us.mcafee.com/virusInfo/default.asp?id=stinger


Bruce Chambers
--
Help us help you:



You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top