Remote procedure call terminated early

  • Thread starter Thread starter Bruce
  • Start date Start date
B

Bruce

I just installed xp home on my computer and it runs fine
except that any connection I make to the net causes nt
authority/system to terminate remote procedure call which
restarts my computer. I cant find a viable reason for it.
But somethings wrong. Dr watson says to query service
control manager. and that it might be in win32_exit_code.
I am using earthlink as a dialup 56k. I have used other
dialups with the same results. So if I need to update
thats not possible thru normal windows update with out
being shutdown. I am running a soyo dragon lite p4x400
with a celeron 2.4 ghz, pc3200 512 ddr kingston,usr 56k
v92 modem,geforce4mx400 64mb,
 
Your computer is now infected with the W32.Blaster.Worm or
one of its variants. This happened because you have not
been using an internet connection firewall and have
apparently neglected to install the critical updates
available at the Windows Update website.
-----------------------------------------------------------
-------
If your computer is constantly attempting to shutdown
or reboot, quickly go to:

Start > Run and type: CMD , and hit enter.
This opens the Command Prompt window.

Then type: shutdown -a , and hit enter.

This should halt the rebooting problem.
-----------------------------------------------------------
-------
Then immediately turn-on Windows XP's built-in Firewall:
http://www.microsoft.com/security/protect/
(To enable the built-in firewall, go to:
Control Panel, double-click Networking and Internet
Connections, then click Network Connections. Right-click
your connection, then
Click Properties, and on the Advanced tab, click the option
"Protect my computer and network..." Note: the built in
firewall only monitors incoming traffic not outgoing (ie
spyware, trojans, etc.. you may have on your system).)

Special note if you use AOL:
America Online installs its own connection settings that
override
the ones that come with Windows XP. America Online's
connection settings don't include a way to turn on Windows
XP's
built-in firewall.


What You Should Know About the Blaster Worm and Its
Variants
http://www.microsoft.com/security/incident/blast.asp

A tool is available to remove Blaster worm and Nachi worm
infections from computers
that are running Windows 2000 or Windows XP
http://support.microsoft.com/?kbid=833330

A security issue has been identified that could allow an
attacker to
remotely compromise a computer running Microsoft Windows
and
gain complete control over it. You can help protect your
computer
by installing this update from Microsoft.
http://www.microsoft.com/downloads/details.aspx?
FamilyId=2354406C-C5B6-44AC-9532-
3DE40F69C074&displaylang=en

Above courtesy of MVP Carey
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

***Install a good firewall. ZoneAlarm is a free one you
can install.
Install a good anti-virus program making sure you keep
it's definitions up to date! ***
- - - - - - - - - - - - -
Microsoft Security Bulletin MS03-39
http://support.microsoft.com/?kbid=824146

What You Should Know About the Blaster Worm
http://www.microsoft.com/security/incident/blast.asp

Protect Your PC
http://www.microsoft.com/security/protect/default.asp

W32.Blaster.Worm a.k.a. W32/Lovesan.Worm
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm
..html

W32.Blaster.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm
..removal.tool.html

W32.Welchia.Worm a.k.a. W32/Nachi.Worm
http://securityresponse.symantec.com/avcenter/venc/data/w32
..welchia.worm.html

W32.Welchia.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.welchia.worm
..removal.tool.html
 
Greetings --

If you connected the PC to the Internet without having first
installed the KB824146 Hotfix, without having first installed an
antivirus application with current virus definition files, and before
enabling a firewall, you're very likely to get infected from any of
the thousands of PCs on the Internet that are constantly broadcasting
the Blaster and/or Welchia worms. It only takes a few seconds of
exposure.

To stay on-line long enough to get the necessary updates, patches,
and removal tools, click Start > Run, and enter "shutdown -a" when the
next RPC countdown begins. This will abort the shut down. Also, make
sure you've enabled a firewall before starting, to preclude any more
intrusions while getting the updates/patches/tools.

Microsoft Security Bulletin MS03-39
http://support.microsoft.com/?kbid=824146

What You Should Know About the Blaster Worm
http://www.microsoft.com/security/incident/blast.asp

W32.Blaster.Worm a.k.a. W32/Lovesan.Worm
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm.html

W32.Blaster.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm.removal.tool.html

W32.Welchia.Worm a.k.a. W32/Nachi.Worm
http://securityresponse.symantec.com/avcenter/venc/data/w32.welchia.worm.html

W32.Welchia.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.welchia.worm.removal.tool.html

McAfee AVERT Stinger
http://us.mcafee.com/virusInfo/default.asp?id=stinger


Bruce Chambers
--
Help us help you:



You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top