Re: ipsec 10106

  • Thread starter Thread starter Dreea
  • Start date Start date
D

Dreea

Hallo,
ich habe das selbe Problem, hast Du eine Loesung gefunden?

hello I have the same problem, I cannot start the ipsec service. It
says: error 10106, and I cannot see Internet . I think this must be the
reason.

Has someone ideas??

thx a lot for helping me!!!
dreea
 
I have traced several of these problems to improperly configured winsock
LSPs. Run "winmsd" and go to Components/Network/Protocol. Look at the
names in the list, anything with "MSAFD" in it or the "RSVP xxx Service
Provider" should be fine. Anything else is suspect, and uninstalling the
owning program might help.

If that fails or your provider list is empty, you may need to rebuild the
catalog from scratch. The following instructions will rebuild your catalog
for TCP/IP. If you are using any other transports (If you don't know, then
you probably aren't) then you will have to reinstall them as well.


1. Backup and delete the following registry keys

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

2. Reboot

3. Go to the network connections folder, right click the icon for your
network connection, and select properties.

4. Click install, choose "protocol", and click "add..."

5. Click "Have Disk...", enter "\windows\inf", click OK

6. Select "Internet Protocol (TCP/IP), click OK

7. When the process in complete, reboot
 
Back
Top